EC-N200-4K

Swit NDI Codec Camera Adapter with 4K60p support

- Encode 12G-SDI camera to high bandwidth NDI®
- Decode NDI® PGM source to HDMI output
- Local video switching and PGM return video
- Intercom with ET-N80 headend
- Intercom mute, call, headset connector
- Onboard TALLY light and external TALLY light
- DC power input 11-17V 1.5A and V-mount
- Support PoE power input 42-57V 0.5A
- Provide a clamp to fix RJ45 network cable
- 15mm rod rail system to install ENG cameras
- Webserver setup and firmware update

NDI EFP Production System
EC-N200-4K is the camera adapter of Swit NDI EFP multi-camera production system.
The camera adapter will encode the camera's SDI up to 12G up to high-bandwidth 4K NDI and also decode the PGM NDI source to display as return video.
The system has a built-in and external TALLY light and supports full-duplex intercom between camera operator and director.

Full Duplex Intercom
The EC-N2004K camera adapter supports 5-pin headset connection and working together with the SWIT ET-N80 intercom control panel, the system supports full-duplex intercom between director and camera operators.
You can control the intercom volume and initiate the director call on the camera adapter.

Interface
The EC-N200-4K camera adapter supports up to 12G-SDI in and loop out, high-bandwidth 4K NDI connected to the network and HDMI monitor output for local video and return video.
The camera adapter provides a 5-pin XLR headphone connector and a 3.5mm jack for external TALLY light, powered by V-Mount or Gold Mount, or via 5.5mm DC-IN or powered by PoE.

TALLY Lights
There is a built-in dual-color TALLY light to display Red (PGM), Green (PVW).
An external TALLY light is also included in the package to install on the front of the camera, for anchoring.

NDI Video Switch Returns
The camera adapter also decodes the NDI PG source and outputs it via HDMI.
Any HDMI-enabled monitor can be used to display local video and output the video in Pic-in-Pic mode or full-screen return video mode by pressing the return button on the camera adapter.

RJ45 Cable Clamp
The camera adapter provides a clamp to secure any standard RJ45 cable, ensuring reliable connection during video productions.

° 15mm Rod System
The EC-N200-4K camera adapter package provides the 15mm rod system to be installed between the camera and the tripod.
The Rod system is universally compatible with all types of ENG cameras and video tripods and is easy to install.