-
- Photographic Lens
- Cine Lenses
- Lens B4 2/3"
- Lens 1/2"
- Lens 1/3"
- Lens "C" mount
- Lens for Micro Cameras
- Optics
- Remote Controls
- Matte Box
- Follow Focus
- Fluid Zoom
- Photographic Lens Adapter
- Converters Close-Up
- Lens - Wide Converter
- Filters Round
- Filters 6x6
- Filters 5x6
- Filters 5x5
- Filters 4x5.65
- Filters 4x4
- Lens - Spare
- Spare parts
- Lens - Accessories iPhone
-
- Microphones Wireless
- Wired microphones
- Microphone stands - Sheet Music Stands
- Microphones - Accessories
- Intercoms
- Power Amplifers
- Audio Mixer
- Sound Diffusion
- Speakers stands
- Audio Recorders
- Cable & Adaptors Audio
- Audio Equipments
- Test Equipments
- Audio-MIDI interfaces
- Measurement microphones
- Audio Monitoring
- Audio over IP
- Musical instruments
- Control surfaces
- Kit Boom
- Spare parts
- Bags for audio devices
- Radio & walkie talkie
AT-4049b
Audiotechnica
₦ 1,035,599.00 VAT excl.
The AT4049b microphone has an interchangeable capsule and is therefore suitable for use in a wide variety of applications.
It has an omnidirectional polar pattern that you can easily change by replacing the capsule (supplied) with one of the others available in the catalog (not supplied):
AT4051b-ELE - CARDIOID capsule
AT4053b-ELE - HYPERCARIDIOID capsule
It has transformerless balanced outputs for a clean signal even at high levels and to avoid distortion typical of transformer coupled outputs.
• Specifically designed to meet the most demanding acoustic requirements in the fields of professional recording, broadcast and sound reinforcement.
• The balanced output without transformer guarantees a clean signal even in the case of high output levels.
• Transformerless circuitry virtually eliminates low frequency distortion and provides premium response to fast transients.
• The sturdy turned brass housing guarantees long-lasting reliability.
• State-of-the-art design and production techniques ensure compliance with the strict standards of reliability and consistency of product quality.
Included accessories:
Rod holder AT8405a
Windproof AT8159
Custody
Capsule: Externally polarized condenser
Polar feature: Omnidirectional
Frequency Response: 20-20,000Hz
High Pass Filter: 80Hz, 12dB / octave
Open circuit sensitivity
- 34 dB (19.9 mV) ref. 1V @ 1 Pa *
Impedance: 50 ohms
Maximum applicable sound pressure
145 dB SPL, 1 kHz @ 1% T.H.D .,
155 dB SPL, with 10 dB attenuator
Intrinsic noise: 16 dB SPL
Dynamic range (typical): 129 dB, 1 kHz @ maximum SPL
Signal to Noise Ratio: 78 dB, 1 kHz @ 1 Pa *
Phantom power requirements: 48V DC, 4.8 mA typical
Switches: linear / filtered, attenuator 10 dB (nominal)
Weight (without accessories): 130 g
Dimensions: 155mm length x 21mm diameter (max)
Connector: Integrated XLR3M
Optional interchangeable capsules
AT4051b-EL (cardioid),
AT4053b-EL (hypercardioid)
Included accessories:
Rod holder AT8405a
Windproof
Soft case
* 1 Pascal = 10 dynes / cm2 = 10 microbars = 94 dB SPL
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Other products in the same category
WH20QTR
U 87 AI
MD 441 U
NT55
E835
MX412DN
AT2020USB-XP
NT1 5th Generation Silver
AT-5047
Rode Vlogger Kit iOS Edition
CVG18RS-BC
VideoMic ME-L
CVG12DS-BC
P120
4066-OC-A-B10-LH

