AT-4033A
AT-4033A
AT-4033A
AT-4033A
AT-4033A
AT-4033A
Previous keyboard_arrow_left
Next keyboard_arrow_right
AT-4033A
AT-4033A
AT-4033A
AT-4033A
AT-4033A

AT-4033A

Audiotechnica

AT4033a Large-Diaphragm Cardioid Condenser Microphone
go to the technical sheet
  • -2.5%
Save 2.5%
€ 437,46

€ 406,94 VAT excl.

€ 448,67
Available in 11 days
Not sure if this is the right product for you? Talk to a consultant

As the latest incarnation of the well regarded AT4033 studio and bluegrass mic, the Audio-Technica AT4033a is a large-diaphragm cardioid condenser microphone designed for detailed, clean, low-noise reproduction of vocals and various instruments, making it a versatile tool in project studios and home setups as well as for commercial facilities. The vapor-deposited gold diaphragm is pre-aged to stay sonically consistent over time while the transformerless circuitry minimizes low-end breakup and contributes to enhanced transient response. Additionally, the precision-machined acoustic baffle yields increased stability.

The capsule assembly's floating construction lessens vibration and a switchable 80 Hz high-pass filter offers at-the-source reduction of rumble and low-frequency buildup. Thanks to the custom shockmount, the AT4033a is further isolated from vibration and stand-borne noise. Since it can take high SPLs without distorting—up to 155 dB with the -10 dB pad engaged—the mic is a great choice for loud instruments in addition to nuanced, intimate performances.



Included accessories:
Antivibration support AT8449
Custody


Included accessories:
Antivibration support AT8449
Custody


Capsule
-Cond. permanent polarized

Polar feature
-Cardioid

Frequency response
-30-20.000 Hz

Open circuit sensitivity
- (- 32 dB (25.1 mV) ref.1V @ 1Pa *)

Impedance
-100 ohm

Max input sound pressure
-145 dB SPL 1 kHz, T.H.D. 1%
-155 dB SPL, with atten. 10 dB

Signal to noise ratio
-77 dB (1 kHz, 1 Pa)

Dynamic range
-128 dB, 1 kHz @ SPL max

Inherent noise
-17 dB SPL

Bass attenuation filter
-80 Hz, 12 dB / octave

Phantom power requirements
-48V dc, 3.2 mA

Weight (excluding accessories)
-380 g

Dimensions
-Length: 170 mm - diameter: 53.4 mm

Output connector
-Integrated 3-pole XLR plug

Included accessories:
Protective transport case,
AT8449 anti-shock support

Loading...