VMA160

JBL

691991004377
JBL VMA160 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier
go to the technical sheet
  • -2.5%
Save 2.5%
€ 826,10

€ 768,47 VAT excl.

€ 847,28
Available in 14 days
Not sure if this is the right product for you? Talk to a consultant
The JBL VMA160 is a Commercial Series Bluetooth-enabled mixer/amplifier designed to provide flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centers, and retail stores. It features a 5-in/1-out mixer and 60W of output power. It can be installed in a standard 19" equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge.

Stream music wirelessly via Bluetooth or connect a USB drive to the front-panel USB Type-A port. Route other sources via Euroblock, RCA, and 1/4" input jacks. The integrated mixer offers level controls as well as bass and treble for each channel. Routing to the Euroblock outputs is configurable. The VMA160 supports voice-activated ducking and priority muting. The front-panel controls and display make operation easy, and remote volume control is possible via a JBL CSR-V module and a standard Ethernet cable (both available separately).

Suitable for commercial and industrial use
Euroblock, RCA, and 1/4" TRS input connectors
Independent bass and treble controls for each output channel
Voice-activated ducking during announcements
Remote volume control capability using optional JBL CSR-V module and Cat5e cable with RJ45 connectors
Priority muting using PTT switch closure
Configurable output routing
Barrier block output connections to drive 8 Ohms, 70V or 100V speaker systems
Media player capable of playing MP3 files from a Bluetooth device or USB drive

Output Power: 60 W (per channel into 4 Ohms or 8 Ohms, 1 kHz, =0.5% THD)

Insertion Loss : 70 V and 100 V Outputs: 1 dB maximum

Input Channels: 5

Output Channels: 1

Tone Controls : Bass and Treble non-detented potentiometers on each channel, Bass: ±14 dB @ 50 Hz, Treble: ±14 dB @ 10 kHz

Input Sensitivity: To obtain full rated power (load of 8 Ohms), Mic Input: 5.5 mVrms, Line Input: 1.3 Vrms, RCA Input (Stereo In): 130 mVrms

Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB

Total Harmonic Distortion (THD) : Measured at 2.83 Vrms into rated load impedance at any output, Power Amp Output: <0.5%, 20 Hz to 20 kHz

Signal-to-Noise Ratio: >76 dB (reference rated power, mixer levels @ minimum, master volume @ maximum A-weighted)

Input Impedance: Nominal Mic: 400 Ohms, Line: 20 kOhms (balanced), RCA: 50 kOhms

Phantom Power : 27 VDC

Crosstalk : -70 dB (reference rated power, volume at mid position, 1 kHz)

Nominal Input Voltages : Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz

Minimum Load Impedance: Low Impedance Output: 4 Ohms, 70 V Output: 80 Ohms, 100 V Output: 160 Ohms

Operating Temperature : 0 to 35°C

Humidity : 95% RH (non-condensing)

Storage Temperature : -20 to 85°C

Dimensions (W x D x H) : 432 x 415 x 88 mm

Weight : 8.8 kg

Loading...