SPA2-60
QSC
- -2.5%
€ 756,04 VAT excl.
€ 833,59The rear panel utilizes Euroblock connectors for inputs and outputs as well as remote inputs. Each channel of the SPA2 provides 60W of power, while the bridge mode provides 200W into 4 or 8 ohms and 250W into 70/100V.
Provides up to 60W per channel into Low-Z loads at 4 and 8 Ohms
Energy Star qualified SPA Series employ an efficient class-D design to conserve energy and reduce operational cost
Provides up to 250W by bridging the output
Rack-mountable 1 RU, half-rack width enclosure—the SPA Series can be mounted in 1 RU, 1/2 rack space, and their clever joining brackets enable easy under table and wall mounting
Number of channels: 2
Power level:
60W per channel
200 W with bridge
Amplifier Class: Class D
Load / voltage impedance
4/8 Ohm
70/100 V
Performance
Frequency Response: 20Hz to 20kHz ± 0.1dB (4 Ohm, 8 Ohm)
Input sensitivity: 1.23V / +4 dBu
Input Impedance:> 10 Kilohm (balanced / unbalanced)
Maximum Gain: 25 dB (at 8 Ohms)
Maximum input level: +24 dBu / 12.3V
SNR:> 100 dB
EQ: None
Filters:
1 x high pass:
80 Hz
Ducking / Muting: None
Connectivity
I
1 line input to 5
lock pin
1 locking 5-pin remote input 1 locking 4-pin speaker output
Digital I / O: None
USB: None
power
AC input power: 100 to 240 VAC, 50/60 Hz
AC Power Connector: 1 x IEC 15A / NEMA 5-15
Physicist
Display and indicators: Front panel:
LED (power / protection / signal)
Back panel:
LEDs (limit / protection / signal, per channel)
Rack Mount Size: 1 RU (with hardware included)
Cooling: Convection
Size: 9.5 x 1.8 x 8.7 "/ 241.3 x 45.7 x 221.0mm
The weight: 3.5lbs / 1.6kg
Packaging information
Package Weight: 5.95lbs
Box Dimensions: 15.6 x 11.4 x 3.75 "
QSC SPA2-60 2-Channel Power Amplifier (60W)
Power Cord
Connector Pack
Set of Rack-Mount Ears
Set of Mounting Brackets
Other products in the same category