Configuring an I / O device has never been so flexible. Plug in and monitor anything from your tally lights, activate ATEM switcher routines, monitor a HyperDeck, switch scopes on a SmartScope Duo, and route inputs / outputs on a VideoHub. The definition of parameters - single or multiple - for inputs / outputs is extremely fast, thanks to the structure of the drop-down menu in UniSketch OS. Connect and control up to 8 devices at the same time!
General purpose I / O controllers offer 8/16 inputs and 8/16 outputs, all electrically separated with quality relays and optocouplers. GPO is implemented with relay shorted to GND. GPI implemented with optical isolators shorted to GND.
Note: SKAARHOJ controllers with GPI inputs accept open collector and relay outputs (connected to GND). The default HD15 tally connector on the TriCaster TC1 does not provide a direct work signal to the ETH-GPI connection. It is necessary to convert the 5V potential to GND.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.