U-22
U-22
U-22
U-22
U-22
Previous keyboard_arrow_left
Next keyboard_arrow_right
U-22
U-22
U-22
U-22
U-22

U-22

Zoom

4515260017027
USB Mobile Recording and Performance Interface
go to the technical sheet
€ 93,86

€ 87,31 VAT excl.

Available 3 unit in 4 Days
Not sure if this is the right product for you? Talk to a consultant
The U-22 from Zoom is a mobile USB 2.0 recording and performance interface, featuring two analog inputs and two analog outputs, in an ultra-portable housing that makes it easy to connect to a laptop or iPhone/iPad for on-the-go audio creation. A low-noise microphone preamp allows for recording vocals, instruments and more, with resolutions up to 24-bit/96 kHz.

The XLR/TS combo input can record a microphone or line-level source, and provides 48V phantom power and Hi-Z support for connecting a guitar or bass. A mini stereo input is also available for recording an iPad, mixer, or other portable audio device. Only one recording input can be used at a time. When using the line input, the XLR/TS combo input is disabled.

For zero-latency recording and mixing, a direct monitoring switch allows listening to the input signal before it passes through the computer. Separate RCA output jacks and an independent headphone output provide multiple options for monitoring.



Stereo USB audio interface for Windows, Mac, iPhone, or iPad

Connect to iPad with Apple iPad Camera Connection Kit or Lightning-to-USB Camera Adapter (sold separately)

XLR/TS input with microphone preamp with Hi-Z input support

+48V phantom power

Gain control knob for microphone/Hi-Z input

Stereo mini line input

Zero-latency direct monitoring

Recording and playback at resolutions up to 24-bit/96 kHz

Dedicated left/right outputs on RCA connectors

Stereo mini headphone output

Includes download code for Ableton Live 9 Lite

Power via two AA batteries (not included) or optional AC adapter

Approximately five hours of operation with AA alkaline batteries

Accepts standard AA alkaline or NiMH rechargeable batteries

Zoom U-22 specs
Interface USB 2.0
Channels 2 Input, 2 Output
Resolution 24-bit
Sampling Rates 44.1, 48, 88.2, 96 kHz
Analog Input Mic/Hi-Z
Connector: 1 x XLR/TRS combo
Input Gain: 0 to 43 dB
Input Impedance: 2.6 kOhms (Mic), 484 kOhms (Hi-Z)
Maximum Input Level: -0.8 dBu (Mic), +8.7 dBu (Hi-Z)
Phantom Power: +48 V

Line In
Connector: 1 x 1/8" TRS stereo mini
Input Impedance: 22 kOhms
Maximum Input Level: +1.0 dBu
Analog Output Output Left/Right
Connector: 2 x RCA phono
Maximum Output Level: -0.8 dBu @ 0 dBFS into 10 kOhms load
Output Impedance: 1 kOhms

Phones
Connector: 1 x 1/8" TRS stereo mini
Output: 2 x 10 mW into 32 Ohms load
Output Impedance: 10 Ohms
Frequency Characteristics 20 Hz to 20 kHz, +/-1.5 dB @ 44.1 kHz
20 Hz to 40 kHz, +/-2 dB @ 96 kHz
Input Noise Measured EIN: -120 dB or less (IHF-A) with 43 dB, 150 Ohms input
Power Requirements USB bus power (Type-B)
5 VDC power supply (micro-B)
2 x AA batteries (about 5 hours continuous operation with phantom power off)
5 W maximum power consumption
System Requirements Mac
Intel Core i3 or faster
OS X 10.9.5 or later, 10.10, 10.11
USB 3.0/USB 2.0*
* Operation is not guaranteed when used with USB hubs or expansion cards

iOS
iOS 7.1 or later
Requires 2 AA batteries or optional AC adapter for power, plus an Apple iPad Camera Connection Kit or Lightning-to-USB Camera Adapter

Windows
Intel Core i3 or faster*
Windows 7 SP1 or later, 8.1, 10 (32-/64-bit)
USB: USB 3.0/USB 2.0**
* Operation is not guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD
** Only USB host controllers with Intel Chipsets are supported and operation is not guaranteed when used with USB hubs or expansion cards
Dimensions (WxDxH) 3.6 x 4.7 x 1.8" (92 x 119 x 45 mm)
Weight 5.3 oz (151 g)

Loading...