-
- Photographic Lens
- Cine Lenses
- Lens B4 2/3"
- Lens 1/2"
- Lens 1/3"
- Lens "C" mount
- Lens for Micro Cameras
- Optics
- Remote Controls
- Matte Box
- Follow Focus
- Fluid Zoom
- Photographic Lens Adapter
- Converters Close-Up
- Lens - Wide Converter
- Filters Round
- Filters 6x6
- Filters 5x6
- Filters 5x5
- Filters 4x5.65
- Filters 4x4
- Lens - Spare
- Spare parts
- Lens - Accessories iPhone
-
- Microphones Wireless
- Wired microphones
- Microphone stands - Sheet Music Stands
- Microphones - Accessories
- Intercoms
- Power Amplifers
- Audio Mixer
- Sound Diffusion
- Speakers stands
- Audio Recorders
- Cable & Adaptors Audio
- Audio Equipments
- Test Equipments
- Audio-MIDI interfaces
- Measurement microphones
- Audio Monitoring
- Audio over IP
- Musical instruments
- Control surfaces
- Kit Boom
- Spare parts
- Bags for audio devices
- Radio & walkie talkie
AT8024
Audiotechnica
Delivers dramatically better sound quality than the camera's internal mic
Selectable line-cardioid mono or mid-side stereo modes
Three-position adjustable input pad and switchable low-frequency roll-off
Integral rubber shock mounts for vibration and mechanical noise isolation
Compact, lightweight design with integral shoe mount
Designed for use with DSLR and other video cameras
Delivers dramatically better sound than built in camera mics
Selectable stereo or mono modes
Three-position adjustable input pad
Switchable low-frequency roll-off
Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise
Integral shoe mount and 3.5mm stereo jack for easy application
Audio-Technica AT8035 specs
Transducer Fixed-Charged, Back Plate, Permanently Polarized Condenser
Polar Pattern Line + Gradient
Frequency Response 40 Hz to 20 kHz
Low Frequency Roll-Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity Phantom: -38 dB (12.5 mV) re 1 V at 1 Pa
Battery: -39 dB (11.2 mV) re 1 V at 1 Pa
Impedance Phantom: 250 ohms
Battery: 300 ohms
Max Input Sound Level (SPL) Phantom: 132 dB SPL, 1 kHz at 1% THD
Battery: 120 dB SPL, 1 kHz at 1% THD
Dynamic Range (Typical) Phantom 110 dB, (1 kHz @ maximum SPL)
Battery 98 dB, (1 kHz @ maximum SPL)
Signal-to-Noise Ratio 72 dB, (1 kHz @ 1Pa / A-Weighted)
Phantom Power Requirements 11 to 52 VDC
Battery AA (1.5v)
Battery Type AA/UM3: 1.5 V
Battery Current 0.4 mA / 1200 hours typical (alkaline)
Output Connectors XLR-3M Type
Switch Flat, Roll-Off
Dimensions (LxDiameter) 14.53 x 0.83" (369 X 21mm)
Weight 6.0 oz. (170 g)
Packaging Info
Package Weight 1.8 lb
Box Dimensions (LxWxH) 19.5 x 4.6 x 2.5"
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Other products in the same category
ECM-673
PINMIC XLR - Rode
ME 9002
XS 1
HC-22
ECM-G1Z
E901
AT2020
CGN521 STS
AT-5045P
OM-08
MD 42
DJI Lavalier Mic
R185B
4288-DC-F-B00-LH




