PRO 35
PRO 35
PRO 35
PRO 35
Previous keyboard_arrow_left
Next keyboard_arrow_right
PRO 35
PRO 35
PRO 35

PRO 35


Cardioid Condenser Instrument Microphone
go to the technical sheet
  • -2.5%
Save 2.5%
€ 215,10

€ 200,09 VAT excl.

€ 220,61
Available in 11 days
Not sure if this is the right product for you? Talk to a consultant
Designed to reinforce the sound of instruments on stage, the Audio-Technica PRO 35 is a clip-on microphone that works equally well on sax, toms, brass instruments, and auxiliary percussion. The mic clamps onto your instrument with the supplied AT8418 UniMount clip, which allows for personalized positioning as well as shock protection for the mic's capsule.

As this is a cardioid microphone, it will have a fairly isolated sonic capture, minimizing bleed from other instruments on stage and reducing the possibility of feedback. The mic is affixed to a 6' cable and power module. A windscreen is also supplied.

Low Profile
The Pro 35 features an ultralow profile, ideal for use on stage or during broadcasts.
Wide Frequency Response
The wide frequency response results in rich detail and character.
Cardioid Polar Pattern
The cardioid polar pattern is effective in minimizing noise and ambiance at the off-axis sections of the microphone.
Includes UniMount Microphone Clip
The UniMount microphone clip positions your microphone on an instrument. It includes a rubber-grip spring that prevents it from marring the finish of your instrument and a flexible boom that allows you to aim the microphone in any direction. Additionally, a cable-strain relief reduces cable-transmitted noise and cable damage.

Form factor: Tool holder
sound field: Mono
Capsule: Electret condenser
Polar pattern: cardioid
Orientation: Final address
Circuit: Solid state
Pad: None
High Pass Filter: 80Hz, 18dB / Octave
Windshield: Foam (included)
Frequency range: 50Hz to 15kHz
Maximum SPL: 145 dB SPL (1 kHz, 1% THD)
Impedance: 250 Ohm
Sensitivity: -45dB
Dynamic range: 115 dB (1 kHz, with maximum SPL)
Signal-to-Noise Ratio: 64 dB (1 kHz, at 1 Pa / 94 dB SPL)
Output connectors: 1 x 3-pin XLR (on power supply)
Headphone connector: None
Cable length: 6 ''/ 1.8m
Cable diameter: 0.1 "/ 2.6mm
Operating voltage: 11 to 52V
Operating current consumption: 2mA
Black colour
Mounting: Instrument clamp (hardware integrator via)
0.4 x L: 0.98 "/ diameter: 10.2 x W: 25 mm (Microphone)
0.7 x L: 3.7 "/ diameter: 18.9 x W: 92.9 mm (Power)
0.3 once / 8g (microphone)
2.9 once / 82g (power supply)
Packaging information
Package Weight: 0.715lbs
Box dimensions: 9.6 x 5.2 x 3 "

Audio-Technica Pro 35 Cardioid Condenser Instrument Microphone
Audio-Technica UniMount Microphone Instrument Mount AT8418
Audio-Technica 2-Stage Foam Windscreen (Small/Black)
Audio-Technica AT8538 Phantom Power Module
Soft Pouch
Limited 2-Year Warranty