BPHS1
BPHS1
Previous keyboard_arrow_left
Next keyboard_arrow_right
BPHS1
BPHS1

BPHS1

Audiotechnica

4961310106805
Broadcast stereo headset with dynamic boom microphone
go to the technical sheet
₦ 382,269.00

₦ 355,599.00 VAT excl.

Available in 11 days
Not sure if this is the right product for you? Talk to a consultant
Audiotechnica - The BPHS1 is a rugged, closed-back stereo broadcast headset with a professional boom-mounted microphone that can be worn on either the left or right hand. It is designed specifically for news, sports, interviews and general announcing. This headset microphone has a unidirectional polar pattern designed for maximum intelligibility of the voice over a wide range of frequencies. It is most sensitive to the pickup of sounds originating directly in front of the element, which helps reduce the pickup of unwanted sounds.

° Microphone features polar pattern tailored for natural sound
° Highly intelligible vocal reproduction
° Closed-back circumaural ear cups help seal out crowd noise
° Neodymium magnets in microphone and headphones
° Rugged design with user-replaceable cable and ear pads
° Cable termination: 3-pin XLRM-type connector for mic & 1/4" for headphones

Headphones
Type: Closed-back Dynamic (Headphone)
Cardioid Dynamic (Microphone)
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 20-20,000 Hz
Maximum Input Power: 1,600 mW at 1 kHz
Sensitivity: 100 dB (Headphone)
-57 dB (1.4 mV) re 1V at 1 Pa (Microphone)
Impedance: 65 ohms
Weight: 264 g (9.3 oz)
Cable - Detachable 3.3 m (10.8'') long with 8-pin connector at headset end, 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") phone plug (headphone) outputs
Accessories Included 3 windscreens, spare connector screw

Microphone
Frequency Response: 40-20,000 Hz
Impedance: 560 ohms
Dimensions: 180.1 mm (7.09") long (boom), microphone extended - 24.0 mm (0.94") diameter (microphone)

1x Mic-headset BPHS1
1x Cable lenght 3 meter 3-pin XLRM/ jack 6,3mm
3x Windscreens
1x Kit Spare connector screw

Loading...