CR-X500
Canon
₦ 42,189,649.00 VAT excl.
The CR-X500 internals sport many resources of a high-resolution Canon camera or camcorder with features such as a 1" dual-pixel CMOS sensor, the Canon DIG!C DV6 image processor, a wide dynamic range, minimum brightness of 3 lux, 15x zoom, 30x digital zoom in Full HD, and video output up to UHD 4K via its 12G-SDI connector. Other professional camera attributes of the CR-X500 include genlock support, HLG, and Canon Log 3 support as well as built-in ND filters with clear, 1/4, 1/16, and 1/64 options. It can perform smooth, precision pan movements with a speed range of 0.5 to 25° per second and tilt movements with a speed range of 0.3 to 20° per second. It features a very low environmental noise rating of NC-55 at under 10° per second.
The camera can utilize an external controller via RS-422 or Canon's proprietary NU serial protocol using the optional RC-IP100 PTZ controller. There is also a built-in lens wiper so you don't have to wipe off the lens yourself if it gets wet or dirty. There is also an AUX port on the back so you can add an optional washing unit.
Key Features
1" CMOS Sensor
The CR-X500 features a Canon 1" 4K CMOS image sensor capable of UHD 4K video capture at 30p and up to 60p in Full HD, making the CR-X500 PTZ camera great for the remote and unobtrusive capture of professional productions.
The 1" sensor allows for larger photosites compared to smaller-sized sensors found in other PTZ cameras, resulting in stunning images with less noise in low-light situations. The large sensor also exhibits a shallow depth of field at large apertures, producing blurred backgrounds in images, while Canon's DPAF tracks and keeps subjects in sharp focus. The CR-X500's DIG!C DV 6 imaging processor drives the high sensitivity (3 lux) and low-noise performance of the camera yielding amazing imagery in a variety of shooting conditions.
Canon DIG!C DV6 Processor
The CR-X500 PTZ camera incorporates Canon's DIG!C DV 6 Image Processor, which is essential in providing high image quality, advanced performance, and convenient operability. This advanced core technology component provides the image-processing power and speed that enables features such as 4K UHD video acquisition and precise AF.
RC-IP100
T-BAR
LX-ePed
LX-ePed Studio
Image Sensor
Image Sensor: 1-Chip 1" CMOS Sensor
Sensor Resolution
Actual: 13.4 Megapixel
Effective: 8.29 Megapixel (3840 x 2160)
Gain: 0 to 33 dB
Minimum Illumination: 3 Lux at 1/60 Shutter Speed
Camera
Shutter Speed: 1/3 to 1/1000 sec
Max Digital Zoom: 30x ( in 1080p)
Built-In ND Filter: Mechanical Filter Wheel with Clear, 2 Stop (1/4), 4 Stop (1/16), 6 Stop (1/64) ND Filters
Lens
Optical Zoom Ratio: 15x
Focal Length: 8.3 to 124.5mm (35mm Equivalent Focal Length: 25.5 to 382.5mm)
Field of View
Horizontal: 5.7 to 73°
Vertical: 3.2 to 45.2°
Maximum Aperture: f/2.8 to 4.5
Image Stabilization: Optical
Focus Control: Autofocus
Manual Focus
Video Output
Broadcast System Compatibility NTSC, PAL
Output Formats SDI:
3840 x 2160p at 59.94 fps
1920 x 1080p at 23.98, 25, 29.97, 50, 59.94 fps
1920 x 1080i at 50, 59.94 fps
1280 x 720p at 50, 59.94 fps
Control
Presets 100
Move Speed: Pan: 0.5 to 25°/sec
Tilt: 0.3 to 20°/sec
Movement Range
Pan: 340° (-170 to 170°)
Tilt: 80° (-50 to 30°)
Supported Control Protocols
NU
RS-422
Interfaces
Video Output Connectors: 1 x BNC (3G-SDI) Female
Control Interface: 1 x 9-Pin D-Sub (RS-422) Input
Other I/O: 1 x BNC (Genlock) Input/Output
Power
PoE Support: None
Power Connectors: 1 x Proprietary (10 to 15 VDC)
Power Consumption: Power Supply: 10.5 to 15 VDC 90 W
Environmental
Operating Temperature: 5 to 104°F / -15 to 40°C
Operating Humidity: 10 to 90%
Storage Humidity: 90%
General
IP Rating: IP55
Dimensions: 15.35 x 15.2 x 13.27" / 38.99 x 38.6 x 33.71 cm (Excluding Protrusions)
Weight: 37.5 lb / 17 kg
Other products in the same category