MixWizard4 1442

Allen-Heath Mixer 14 Channels, 10 Mono Mic/Line + 2 St.Line + 4 Sub Groups, EQ IN/OUT switch, 4 Band EQ

° 10 Mic/Line Inputs
10 mic/line inputs with balanced XLR/TRS jack feed our renowned clean and detailed preamp design.

° 2 Dual Stereo Inputs
The 2 dual stereo channels are perfect for stereo playback or for hooking up keyboards and other stereo instruments.

° 6 Auxes
Flexible aux section with 2 pre-fade, 2 switched and 2 post-fade sends.

° 6×2 Matrix
Perfect for feeding delay and fillspeakers, broadcast and recoding mixes, and more.

The WZ4 14:2 can be easily configured to run as a FOH or monitor desk, or even a combination for those times when you need to mix monitors and FOH from the same desk.

° FOH
In FoH Mode, the 4 groups with inserts, 100mm faders and XLR outputs can be routed and panned to the LR mix for flexible sub-mixing.
The main LR mix has inserts, separate left and right faders, and XLR outputs to feed the main speaker system.
EQ and signal processing can easily be inserted on group and main outputs.

° Monitor
In Monitor Mode, the aux mixes are routed to the group and LR faders, inserts and XLR outputs.
The AFL and PFL system is switched to the Mono output to provide an engineer's ‘wedge' output.
In essence, it's a perfect 6-mix monitor console with additional outputs available from the group busses via the aux master controls.

° Dual
In Dual Mode some auxes can be used as monitor mixes and some sub-grouping can be used along with the main LR outputs, allowing the engineer to run FoH sound and some Monitor mixes from the same console.

° Comprehensive Aux System
All MixWizard4 models offer a generous 6 auxes, each with its own master level rotary control and impedance-balanced TRS outputs.
A clever monitoring system lets you listen to aux outputs in mono or in stereo pairs.
Auxes 1-2 are routed pre-fade for monitors, auxes 3-4 are switchable pre or post-fade for monitors, FX or additional recording or zone feeds, and auxes 5-6 are routed post-fader for FX and aux-fed sub.
These pre/post settings can be changed via internal jumpers.

° Dual Stereo Channels, Flexible Stereo Routing
On WZ4 14:4:2 and WZ4 12:2, two dual stereo channels with TRS connectors and independent gain controls are included for FX returns and stereo line sources.
One stereo input can feed straight to LR, so providing extra returns.
The stereo channels feature a 4-band EQ and can be routed to all 6 auxiliary sends.