AT-4021
AT-4021
AT-4021
AT-4021
AT-4021
Previous keyboard_arrow_left
Next keyboard_arrow_right
AT-4021
AT-4021
AT-4021
AT-4021

AT-4021

Audiotechnica

4961310103002
Cardioid Condenser Microphone high dynamic - low noise
go to the technical sheet
  • -2.5%
Save 2.5%
€ 423,21

€ 393,68 VAT excl.

€ 434,06
Available in 11 days
Not sure if this is the right product for you? Talk to a consultant
The Audio Technica AT4021 Cardioid Condenser Microphone features a low-profile design and small-diaphragm condenser element. The microphone's low self-noise is suited for the most sophisticated recording equipment. Its sensitivity, frequency response, and SPL capabilities are fit for use with speaker cabinets, vocals, percussion instruments, drums, and spot placement on guitars, and stringed instruments. There is a cardioid polar pattern for minimizing noise and off-axis feedback and an 80 Hz high-pass filter switch for reducing low frequencies and associated noise. Additionally, a -10 dB Pad switch provides extra headroom and minimizes distortion when capturing transient (peaking) audio signals. The package includes a stand clamp, a windscreen, and a protective carrying case.

Cardioid Polar Pattern
The cardioid polar pattern minimizes noise and off-axis feedback.
Switchable 80 Hz High Pass Filter
The 80 Hz high-pass filter switch reduces hum, low-frequency noise, and rumble.
-10 dB Pad Switch
A -10 dB Pad provides additional headroom for capturing peaking audio signals without distortion and noise.


In the Box
Audio-Technica AT4021 Cardioid Condenser Microphone
Audio-Technica AT8405a Snap-in Microphone Stand Clamp
Audio-Technica AT8159 Small Egg-Shaped Foam Windscreen
Protective Carrying Case
Limited 5-Year Warranty

Microphone
Form Factor: Stand/Boom Mount
Sound Field: Mono
Capsule: Condenser
Polar Pattern: Cardioid
Pad: -10 dB
High-Pass Filter: 80 Hz, 18 dB/Octave
Tone Adjustment: None
On-Board Controls: High-Pass Filter, Pad
Windscreen: Foam (Included)

Performance
Frequency Range: 20 Hz to 20 kHz
Maximum SPL
° 146 dB SPL
° 156 dB SPL (with Pad)
Impedance: 250 Ohms
Sensitivity: -34 dB (Open Circuit Voltage)
Dynamic Range: 132 dB (Typical)
Signal-to-Noise Ratio: 80 dB A-Weighted (1 kHz)
Equivalent Noise Level: 14 dB A-Weighted
THD: 1%

Connectivity
Output Connectors (Analog): 1 x XLR 3-Pin (on Mic)

Power
Operating Voltage: 48 V (Phantom Power)
Operating Current Consumption: 3.0 mA

Physical
Color: Gray
Mounting: Mic Clip/Stand Adapter (Included)
Construction Material: Brass
Dimensions: 0.83 x L: 5.67" / diameter: 21 x L: 144 mm
Weight: 4.2 oz / 119 g

Packaging Info
Package Weight: 0,45 Kg / 1 lb
Box Dimensions: 25x11x4 cm. /10.2 x 4.4 x 1.6")

AT4021 Cardioid Condenser Microphone
AT8405a Snap-in Microphone Stand Clamp
AT8159 Small Egg-Shaped Foam Windscreen
Protective Carrying Case
Limited 5-Year Warranty

Loading...