
TLM102 Studio Set
Neumann
₦ 1,248,299.00 VAT excl.
The mic has a linear response, with a slight boost in the 6kHz range to provide excellent vocal presence. The mic's cardioid pickup pattern provides excellent off-axis rejection so you only pick up desired sounds. The metal grille has an integrated pop filter to minimize the impact of plosive vocals.
The TLM 102 features transformerless circuitry for noiseless operation, resulting in impeccably clean audio. The mic operates on standard 48V phantom power and has a 3-pin XLR connector for use with a variety of sound systems and devices, ideal for home, mobile, studio, or broadcast applications.
Compact design with characteristic Neumann looks
Large pressure gradient condenser capsule is internally shock-mounted to prevent vibration noise
Handles extremely high SPL levels, ideal for picking up loud sources such as drums and amps
Linear response for minimal coloration and clearly defined bass, with a slight boost in the 6kHz range to provide excellent vocal presence
Cardioid pickup pattern provides excellent off-axis rejection so you only pick up desired sounds
Transformerless circuitry for noiseless operation and impeccably clean audio
Metal grille has an integrated pop filter to minimize the impact of plosive vocals
Operates on standard 48V phantom power
Standard 3-pin XLR connector for use with a variety of sound systems and devices
K-HG
K-HGW
K-SMS
MZS 6
EA 4
PS-6
EA 4 mt
K-ZFZL
PSA-1
Technical Data
===================
Acoustical operating: Pressure gradient transducer
Maximum SPL for THD 0.5%2): 144 dB
Directional pattern: Cardioid
Maximum output voltage: 13 dBU
Frequency range: 20 Hz...20 kHz
Dyn. range of the mic. amplifier (A-weighted): 132 dB
Sensitivity at 1 kHz into 1 kohm: 11 mV/Pa
Supply voltage (P48, IEC 1938): 48 V ± 4 V
Rated impedance: 50 ohms
Current consumption (P48, IEC 1938): 3.5 mA
Rated load impedance: 1 kohms
Matching connector: XLR3F
Equivalent noise level, CCIR1): 21 dB
Weight approx.: approx. 260 g
Equivalent noise level, A-weighted1): 12 dB-A
Diameter: 52 mm
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 73 dB
Length: 116 mm
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 82 dB
Supplied with elastic shock absobing EA4 included
Other products in the same category