-
- Photographic Lens
- Cine Lenses
- Lens B4 2/3"
- Lens 1/2"
- Lens 1/3"
- Lens "C" mount
- Lens for Micro Cameras
- Optics
- Remote Controls
- Matte Box
- Follow Focus
- Fluid Zoom
- Photographic Lens Adapter
- Converters Close-Up
- Lens - Wide Converter
- Filters Round
- Filters 6x6
- Filters 5x6
- Filters 5x5
- Filters 4x5.65
- Filters 4x4
- Lens - Spare
- Spare parts
- Lens - Accessories iPhone
-
- Microphones Wireless
- Wired microphones
- Microphone stands - Sheet Music Stands
- Microphones - Accessories
- Intercoms
- Power Amplifers
- Audio Mixer
- Sound Diffusion
- Speakers stands
- Audio Recorders
- Cable & Adaptors Audio
- Audio Equipments
- Test Equipments
- Audio-MIDI interfaces
- Measurement microphones
- Audio Monitoring
- Audio over IP
- Musical instruments
- Control surfaces
- Kit Boom
- Spare parts
- Bags for audio devices
- Radio & walkie talkie
AT-2050
Audiotechnica
- -2.5%
€ 253,16 VAT excl.
€ 279,13• Selectable polar pattern: omnidirectional, cardioid, figure-of-eight
• Dual diaphragm capsule design maintains precise polar pattern definition over the entire frequency range of the microphone.
• Selectable 80 Hz high pass filter and 10 dB attenuator
• The electronic circuits are made with state-of-the-art surface mount components that ensure compliance with the strict standards of reliability and consistency established by A-T.
Included accessories:
Antivibration support AT8458
Case
Capsule
Externally polarized capacitor
Polar feature
Cardioid, Omnidirectional, Figure of 8 (bidirectional)
Frequency Response
20-20,000 Hz
High pass filter
80 Hz, 12 dB / octave
Open circuit sensitivity
- 42 dB (10.0 mV) ref. 1V @ 1 Pa *
Impedance
120 ohm
Sound pressure max. applicable
149 dB SPL, 1 kHz @ 1% T.H.D .;
159 dB SPL with 10 dB attenuator
Inherent noise
17 dB SPL
Dynamic range (typical)
132 dB, 1 kHz @ maximum SPL
Signal to noise ratio
77 dB, 1 kHz @ 1 Pa *
Phantom power requirements
11-52V DC (± 4V), 4.7mA typical
Switches
Polarity selector; Linear / filtered;
attenuator 10 dB (nominal)
Weight
412 g
Dimensions
170 mm long, 52 mm diameter (maximum)
Connector
Integrated XLR3M
Accessories Included
AT8458 anti-shock support; adapter
threaded from 5/8 "-27 to 3/8" -16; soft case
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Other products in the same category