SM7B
SM7B
SM7B
SM7B
SM7B
Previous keyboard_arrow_left
Next keyboard_arrow_right
SM7B
SM7B
SM7B
SM7B

SM7B

Shure

0042406088879
Cardioid microphone for voiceover and studio applications (tv-web-radio)
go to the technical sheet
₦ 877.461,97

₦ 816.243,70 VAT excl.

Available 3 unit in 4 Days
Not sure if this is the right product for you? Talk to a consultant
The SM7B Vocal Microphone from Shure is a large diaphragm dynamic microphone that possesses all of the necessary qualities for professional voiceover applications.

Flat, Wide-Range Frequency Response
The flat frequency response enhances the mid-range and high frequencies that are associated with the human voice.

Rejection Of Electromagnetic Hum
Improved rejection of electro-magnetic hum, optimized for shielding against broadband interference emitted by computer monitors.

Air Suspension Shock Isolation
Internal "air suspension" shock isolation virtually eliminates mechanical noise transmission.

Pop Filter
Built-in pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration.

Cardioid Polar Pattern
Cardioid polar pattern effectively isolates signal source improving gain before feedback.

Specifications
Transducer Type: Dynamic
Polar Pattern: Cardioid
Frequency Response: 50 Hz - 20 kHz
Impedance: Microphone impedance rating is 150 ohm (150 ohm actual) for connection to microphone inputs rated at 19 to 300 ohms.
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3.
Output Level (at 1,000 Hz): Open Circuit Voltage* - 59.0 dB (1.12 mV) [*0 dB = 1 volt per Pascal]

Electromagnetic Hum Sensitivity
(Typical, Equivalent SPL/milliOersted)
° 60 Hz: 11 dB
° 500 Hz: 24 dB
° 1 kHz: 33 dB
Sensitivity (1 kHz): -59.0 dBV/Pa / 1.12 mV/Pa

General
Switches: Bass rolloff and mid-range emphasis: Slotted response selector switches.
Cartridge Shock Mount: Internal air-suspension shock and vibration isolator.
Microphone Connector: Three-pin professional audio (XLR)
Swivel Assembly: Integrated, captive nut for ease of attachment to stand, fits 5 / 8 in.-27 thread.
Case: Dark gray enamel aluminum and steel case with dark gray foam windscreen
Dimension: 190 x 64 mm (without support)
Weight: 765g

1x SM7B microphone
1x Switch Cover Plate RPM602
1x Close-Talk Windscreen A7WS

Loading...