-
- Photographic Lens
- Cine Lenses
- Lens B4 2/3"
- Lens 1/2"
- Lens 1/3"
- Lens "C" mount
- Lens for Micro Cameras
- Optics
- Remote Controls
- Matte Box
- Follow Focus
- Fluid Zoom
- Photographic Lens Adapter
- Converters Close-Up
- Lens - Wide Converter
- Filters Round
- Filters 6x6
- Filters 5x6
- Filters 5x5
- Filters 4x5.65
- Filters 4x4
- Lens - Spare
- Spare parts
- Lens - Accessories iPhone
-
- Microphones Wireless
- Wired microphones
- Microphone stands - Sheet Music Stands
- Microphones - Accessories
- Intercoms
- Power Amplifers
- Audio Mixer
- Sound Diffusion
- Speakers stands
- Audio Recorders
- Cable & Adaptors Audio
- Audio Equipments
- Test Equipments
- Audio-MIDI interfaces
- Measurement microphones
- Audio Monitoring
- Audio over IP
- Musical instruments
- Control surfaces
- Kit Boom
- Spare parts
- Bags for audio devices
- Radio & walkie talkie
HS-150MC
Libec
€ 1.130,57 VAT excl.
Lightweight carbon legs
HS-150MC tripod systems include the RT20C carbon tripod, the SP-1B floor spreader and the FP-1B foot pads, which are specially designed for the RT20C.
Thanks to the lightweight tripod and accessories, the HS-150MC is about 20% lighter in weight (1.2kg/ 2.6lb) than
the HS-150/150M tripod system.
Perfect Balance
Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle.
This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position.
Newly Designed Fluid Head
From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity.
From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience.
Counterbalance range: 0.8 to 2kg/ 1.7 to 4.4lb (C.G.55mm)
Payload: 3kg/ 6.6lb
Counterbalance: Perfect Balance, Continuous Counterbalance with illuminated meter
Drag mode: Free plus 3 steps
Drag system: Multilayered Metal Structure
Tilt angle: +90°/ -70°
Temperature range: -40°C to +60°C/ -40°F to +140°F
Bubble level: Illuminated
Camera plate: Sliding plate compatigle with Manfrotto and Sachtler heads
Sliding range: +/-30mm / 1.2"
Long sliding plate: Optional
Head base: 75mm ball/Flate base
Plate attacment: 1/4" screw with video pin
Accessory attachments: 1/4" and screw holes
Spare screw: 1/4" and 3/8" screws
Pipe material: Carbon
Weight: 4.7kg/ 10.3lb
Height: 79 to 166cm/ 31.1 to 65.3"
Section: 2-Stage
Advanced tripod system with carbon legs and mid-level spreader
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Other products in the same category