System Ace XL Flowtech75 GS

Sachtler Ace XL Fluid Head with flowtech 75mm Carbon Fiber Tripod & Carry Handle Kit - 1017GS

The Sachtler Ace XL Fluid Head with flowtech 75mm Carbon Fiber Tripod & Carry Handle Kit provides you with an entire tripod system with carrying accessories and a padded bag for transport and storage.
The Ace XL fluid head features a sliding balance plate with a 4" (10 cm) sliding range, and it supports cameras and rigs from 4.4 to 17.6 pounds/2 to 8 kg.
It features three grades of pan and tilt drag, a zero setting for completely free movement, and eight steps of counterbalance.

The flowtech 75 carbon fiber legs are lightweight and extremely stable.
Capable of supporting up to 44 pounds/20 kg, they resist twist when panning for smooth camera movements.
The included ground spreader folds neatly into the legs when packed for transport and allows a working height range from 10 to 62.2"/1.60 m.
The carry handle attaches to the head fitting of the legs, providing a comfortable way to carry the legs.
The padded bag holds the head and legs during transport and storage.

Sachtler Ace XL Fluid Head (75mm Bowl)
The Sachtler Ace XL Fluid Head (75mm Bowl) is designed for digital cine-style cameras, supporting rigs weighing up to 17.6 pounds/8 kg.
This fluid head is suitable for larger DSLR and mirrorless MFT cameras, as well as pro-style cameras such as the Blackmagic URSA Mini/Pro, Canon C200/C300 Mk II, Sony FS series, and the Panasonic EVA1.
The Ace XL fluid head features eight steps of counterbalance and three steps of pan and tilt drag adjustment, plus a zero drag option for pan and tilt.

Mount your camera using the Ace XL Fluid Head's slide-in balancing plate with 1/4-20" screw and locating pin.
With a sliding range of 4.1"/10.41 cm this head can adapt to variously configured rigs.
Additional features include a detachable, right-side pan bar and an illuminated bubble level.
With an integrated flat head base, the Ace XL can be configured for shooting with a slider.

Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader
The Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength.
The legs weigh just under 7 pounds/3.18 kg yet they can support a payload of up to 44 pounds/20 kg and extend from a minimum height of 10"/25.40 cm to a maximum height of 62.2"/1.60 m when using the included ground spreader.
Each leg features a single clamping lever that locks and unlocks the sections.

Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs.
This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish.
This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability.
The dual spikes at the end of each leg provide extra grip when working on softer ground without the spreader.
An attachment point and carry handle are included.

Vinten Carry Handle for flowtech 75/100mm Tripod
The Carry Handle for flowtech 75/100mm Tripod from Vinten enables you to carry your lightweight flowtech tripod single-handedly.
This handle mounts easily on one of the tripod's accessory docks.

Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head
With dimensions of 36.6 x 7.9 x 9.1"(93x20x23 cm) this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head.
It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.

The bag opens via a full-length zipper found at the top, which allows for easy access while shooting.
For transport, two straps on each side can be connected to an integrated handgrip for easy carrying.
There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.