HS-250
Libec
₦ 2,298,949.00 VAT excl.
This HS-250 Tripod System from Libec outfits you with a 11 lb/5 kg load capacity fluid head, a compatible ground spreader, and a carrying case to bring it to set.
Intuitive adjustment of pan, tilt, and counterbalance makes for a customizable experience.
Aluminum construction creates a lightweight and durable tripod design.
Libec H25 75mm Ball and Flat Base Video Head with Pan Handle (11 lb/5 kg Payload)
Integrate a fluid head into your tripod configuration with various adjustment features using this H25 75mm Ball and Flat Base Video Head with Pan Handle from Libec.
An included pan handle makes for easy movement up and down or side to side.
Independent pan and tilt adjustments make movements intuitive and smooth.
The H25 head has a load capacity of 11 lb/5 kg and an adjustable counterbalance range of 3.7 to 9.9 lb/ 1.68 to 4.50 kg.
Your camera is secured via a 1/4"-20 screw and locating pin, and additional 3/8"-16 and 1/4"-20 screws are included for further attachments.
An illuminated bubble level ensures your configuration is level when mounted onto tripod legs.
The H25 is compatible with Manfrotto or Sachtler heads.
Libec RT30B 2-Stage Aluminum Tripod Legs
The Libec RT30B 2-Stage Aluminum Tripod Legs feature a 75mm bowl base and support up to 55 lb/25 kg loads.
The height range is a low minimum height of 16"/41 cm to a maximum height of 59.5"./1.51 m.
The tripod has spiked feet for use on soft ground, and the aluminum die-cast material used for the upper leg casing enhances overall stability.
Libec SP-2B Ground Spreader
The Libec SP-2B Ground Spreader is a ground-level tripod spreader that replaces the SP-1B.
More user-friendly and durable than its predecessor, the SP-2B is designed for use with the RT30B and RT40B tripod legs.
It works on level surfaces, providing both stability and floor protection.
Libec Carrying Case
The Libec RC-30 Carrying Case (Black) is a non-padded, vinyl case designed to carry a Libec RT-30 tripod with an RH-30 tripod head attached.
It is carried by the handle or the attached, adjustable shoulder strap.
Compatible with Libec RT-30 tripod with an RH-30 tripod head
Libec H25 75mm Ball and Flat Base Video Head with Pan Handle (11 lb/5 kg Payload)
Camera Plate Features: Sliding Balance Plate
Camera Mounting Screw: 1 x 1/4"-20 Male with Locating Pin
Balance Plate Sliding Range: 1.2" / 30 mm
Base Mount: 75 mm Half Ball
Counter Balance: Continuous (3.7 to 9.9 lb / 1.7 to 4.5 kg)
Center of Gravity: 3.9" / 100 mm
Included Pan Handle Length: 10.8" / 275 mm
Bubble Level: 1 x Illuminated
Accessory Mounting:
1/4"-20 Female Thread
3/8"-16 Female Thread
Drag Control Tilt: Stepped 3-Step
Pan: Stepped 3-Step
Drag Type: Fluid
Vertical Tilt: +90° to -70°
Independent Pan Lock: Yes
Independent Tilt Lock: Yes
Load Capacity: 11 lb / 5 kg
Operating Temperature: -8 to 92°F / -40 to 60°C
Weight: 6.2 lb / 2.8 kg
Libec RT30B 2-Stage Aluminum Tripod Legs
Head Mount Type: 75 mm Bowl
Maximum Workin Height: 59.5" / 150.5 cm
Minimum Working Height: 16" / 40.6 cm
Closed Length: Not Specified by Manufacturer
Materials: Aluminum
Weight: 5.7 lb / 2.6 kg
Leg Lock Type: Rotating Locking Lever
Independent Leg Spread: Yes
Leg Sections: 3
Feet Features: Spiked
Libec SP-2B Ground Spreader
Package Weight: 2.665 lb/1.21 kg
Libec Carrying Case
Carrying/Transport Options: Connecting Handles, Shoulder Strap
Type of Closure: Zipper
Exterior Material: Vinyl, Nylon
Padded: No
1x Libec H25 75mm Ball and Flat Base Video Head with Pan Handle (11 lb Payload)
2x Spare 1/4"-20 and 3/8"-16 Screws
1x Libec RT30B 2-Stage Aluminum Tripod Legs
1x SP-2B Ground Spreader
1x Carrying Case
Other products in the same category