Focus 8 - KF08-RLM

Focus 8 Fluid Head with 75mm Bowl Base
Red Lock 3-Tube Aluminum Tripod
Mid-Level Spreader, Sliding Camera Plate
18 lb Maximum Load, 63.5" Maximum Height
+/-90° Tilt, Bubble Level

he Focus 8 Fluid Head with Red Lock Tripod System from Cartoni includes the Focus 8 fluid head, Red Lock three-section tripod legs, a mid-level spreader, and a soft carry case. The system is designed for camera rigs weighing up to 18 pounds.

The Focus 8 features a convertible 75/100mm bowl base with the included adapter ring, providing a wide support that makes it suitable for larger cameras. The three-section Red Lock legs feature a minimum height of 20", a maximum height of 58", and a transport length of 30", and the legs utilize flip locks to secure the sections in place. The tripod features spikes and rubber feet that hook on for balancing on different surfaces.

The lightweight Focus 8 Fluid Head from Cartoni is designed to support small rigs that weigh up to 18 lb. The Focus 8 features a fluid damping system, a 75mm ball base, a bubble level, and a telescoping pan bar, and it weighs only 4 lb.

The Focus 8 incorporates the same type of sliding quick release plate as on Sachtler Ace and Manfrotto video heads, and it features +/-90° tilt motion and 360° panning with individual pan and tilt locks. Its fluid design results in smooth, continuous drag, providing damping and dynamic counterbalance throughout its movement.
Quick Features

75mm base
Supports loads between 0 and 18 lb
Balance along entire +/-90° tilt range
Quick release sliding plate system compatible with Sachtler Ace and Manfrotto video heads
Independent pan and tilt locks
Continuous counterbalance and drag
Includes a pan bar



Cartoni Red Lock 3-Tube Aluminum Tripod

The Red Lock 3-Tube Aluminum Tripod from Cartoni is designed for use with camera rigs weighing up to 132.3 lb. It features a convertible 75/100mm bowl base with the included adapter ring and provides a wide support that makes it suitable for fluid heads such as the Focus 8, 10, or 12, and for midsize to larger cameras.

The three-section legs feature a minimum height of 20.5", a maximum height of 58.3", and a transport length of 29.9", and the legs utilize flip locks to secure the sections in place. The spiked feet allow you to balance the tripod on rough surfaces. The tripod legs weigh 8.8 lb.
Three-section, two-stage, three-tube aluminum tripod legs
Compatible with all ENG and HD camera rigs weighing up to 132.3 lb
Efficiently interfaces with 75 or 100mm bowl-based fluid heads such as the Focus 8, 10, or 12
Spiked feet for rough surfaces