MFT to PL Mount Pro
Wooden Camera
If you are using the MFT to PL Mount Pro without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses.
In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity.
Includes:
(2) M4x20mm socket cap screw
(1) 1/4-20 Support Foot
(1) Universal Support Foot
XEEN SYX50C
CN-E 70-200mm T4.4 L IS KAS S
COMPACT CN-E Double Lens Kit
XEEN SYX24C
CN-E EF 24mm T1.5 M
XEEN SYX85C
XEEN SYX14C
CN-E 18-80mm T4.4 L IS KAS S
XEEN SYX35C
CN-E EF 35mm T1.5 M
CN-E Kit 14245085135mm - Canon
CN-E Kit 1424135mm - Canon
CN-E Kit 245085mm - Canon
CN-E Kit 1424355085135mm - Canon
CN-E Kit 142435mm - Canon
CN-E Kit 243585mm - Canon
EF 400mm F2.8L IS II USM
EF 200mm F2.0L IS USM
EF 16-35mm F4L IS USM
Otus 1.4 85mm EF-MOUNT Canon
SY13VC
EF-S 24mm F28 STM
100mm f2.8 U-Macro EF
EF 24mm F1.4L II USM
EF 75-300mm F4.0-5.6 III
EF 500mm F4.0L IS II USM
EF 70-200mm F2.8L IS III USM
SY16V2
TS-E 17mm F4.0L
EF 800 mm F5.6L IS USM
Otus 1.4 55mm EF-MOUNT Canon
EF 24-70mm F2.8L II USM
EF-S 10-18mm F4.5-5.6 IS STM
EF 600mm F4.0L IS II USM
EF 16-35mm F2.8L III USM
EF 100mm F2.8L Macro IS USM
SY10VC
EF 70-200mm F4.0L IS II USM
TS-E 90mm f2.8L Macro
60mm f2.8 Ultra-Macro 21
EF-S 10-22mm F3.5-4.5 USM
EF 40mm F2.8 STM
TS-E 24mm F3.5L II
EF 70-300mm F4.5-5.6 DO IS USM
85mm f1.4 Planar ZE EOS
EF 100-400mm F4.5-5.6L II USM
E-Mount to PL Adapter Pro (A7s) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of all PL mount lenses onto the Sony A7, A7r, and A7s cameras as well as FS100 and FS700. In our factory, we set the flange focus to match a Sony A7s camera. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Mount includes a foot which attaches the PL mount directly to the base of the body and allows for attaching to a tripod directly eliminating strain on the camera. PL Cap included to prevent dust from entering sensor area when lens is not attached.
This adapter will also work with any E-Mount camera like the FS100, FS700, NEX-5, NEX-6, NEX-7, etc, once the support foot is removed.
Features:
- 1/4-20 foot for attaching tripod plate or support
Includes:
(2) M3 socket cap screws
(1) 1/4-20x1/4" socket cap screw
Shim set (stackable to achieve necessary thickness)
Silver .0127mm (0.0005")
Amber .0254mm (0.001")
Purple .0381mm (0.0015")
Red .0508mm (0.002")
Green .0762mm (0.003")
Tan .1016mm (0.004")
Blue .127mm (0.005")
Flange Focus Adjustment Procedure:
Other products in the same category