TZ-11

Zeapon Micro3 E700 PONS PT Kit: composed of Micro3 E700- Panorama/Tilt motorized head (ZPNTZ-11) - Black

Zeapon Micro3 is an innovative series of double extension sliders, which share the same motor.
Micro3 uses a new 45-degree inclined track design that disperses weight both horizontally and vertically: the payload ranges from 4 to 12 kg.
The innovative design retains physical button controls, for users who don't like to adjust settings via APP.

° Adjustable vacuum cushioning
The Micro3 Series' fluid damping technology allows videographers to achieve smooth, repeatable camera movements.
With Micro3 the new adjustable vacuum cushioning technology is introduced.
The vacuum structure, combined with a special protective grease, not only provides considerable cushioning fluidity but also allows continuous adjustment of the friction of the slider movement.
The friction setting can be adjusted from 1 to 5 where the higher number corresponds to greater resistance.
The videographer can choose the setting that best suits the occasion and his own shooting style.
The adjustable friction technology also solves the problem of hydraulic resistance caused by very low temperatures.

° Quick change without changing the belt
Micro3 has been totally redesigned compared to the previous version, now the slider tracks and the motor are independent and driven by a high resistance Arri rosette gear in stainless steel.
The motor can be easily integrated and removed using the quick-release screws, effortlessly switching between manual and motorized modes to handle different shooting scenarios.
By removing the motor, the size of the slider is minimized for easier transportation.

° Triple support system
The weight relief on the tripod has been moved from the center of the slider to the support components at both ends where 1/4" and 3/8" mounts have been added.

° Support components
The new design not only increases stability when leaning on flat surfaces, it also allows you to maximize creativity: you can mount the Micro3 upside down or on a car.

° Support rods for tripods
All Micro3 series comes with tripod support rods, no need to purchase them separately.

° All-Round Belt
Zeapon Micro3 features improvements in every single part.
The belt lock is a large diameter knob - no fear of accidentally damaging the belt or operating it unintentionally.

° Wide mounting base
The Micro3's wide mounting base is approximately 3 times larger than the previous generation, significantly increasing the contact surface and allowing you to mount the camera more securely and stably.

° Direct power supply
When the battery runs out or you need more time for shooting, you can power the Micro3 using a power bank or a power adapter with standard 5V and 2A.

° Stainless loading parts
The Micro3's guides and bearing wheels are made of robust and wear-resistant stainless steel, capable of resisting damage from humidity and sand in extreme environments.

*Note:
To protect the slider during shipping, the bottom of the new slider is equipped with fixing screws.
Refer to the instructions on the seal to remove them correctly.