Single Axis-S1A1

Wireless Motion Control for Shark Slider
Single-Axis System
Repeats up to 9 Programmed Moves
Supports Camera Rigs up to 17.6 lb

The S1A1 Wireless Motion Control System from iFootage enables you to add wireless motion control to your Shark Slider S1 (not included). The system consists of an electronic motor, a wireless shutter controller, and the wireless controller. This single-axis system provides steady, automatic moves for time-lapse and motion control moves. The time-lapse mode features a preview function to help you envision the finished shot. A manual mode lets you adjust movements on the fly. Up to nine moves can be programmed and repeated.

The included 95W battery attaches to the slider and will run the controller for up to 12 hours with continuous shooting, or up to 16 hours in time-lapse mode. The compact S1A1 Motion Control System includes seven camera shutter cables, a battery charger, and a carrying case. Camera rigs weighing up to 17.6 lb can be supported by the system.
Features

Adds wireless motion control to the Shark Slider S1 (not included)

Single-axis system with up to nine programmable moves

Supports cameras up to 17.6 pounds

Stop motion control and time-lapse mode with a preview function

Manual mode for on the fly shots

The included rechargeable 95W battery will run the system for up to 12 hours continuously, or up to 16 hours in time-lapse mode


Speed Range 0.04-6.3"/sec (1-160 mm/sec)
Location Accuracy 0.0004" (0.01 mm)
Maximum Load 17.6 lb (8 kg)
Motor Power 8-32 W
Output Voltage 14.8-24 V
Operating Frequency 2.4 GHz
Remote Distance 65.6' (20 m)
Speed Control Adjustable speed, gearing speed