UV-C BOXER

Cartoni

4260725673422
Medical-grade UV-C device designed for film and video equipment
go to the technical sheet
€ 9.758,46

€ 9.077,64 VAT excl.

Available in 14 days
Not sure if this is the right product for you? Talk to a consultant
The Cartoni UV-C BOXER is the only medical-grade UV-C device designed for film and video equipment and has been tested and certified by independent laboratories. The UV-C medical-grade lamps in the Cartoni UV-C BOXER germicidal device has been designed and tested to provide ten times the irradiation needed to sanitize the surface of objects in the device.

The tests prove an efficiency of 99,998% in the destruction of several microorganisms, including Human Coronavirus Covid 19.

The BOXER has 10 Osram/Philips 4watt medical-grade UV 9-watt lamps installed in the chamber. The chamber is covered by high reflection polished aluminum on all six sides, which reflect the UV-C lamp beams in all directions to cover the entire surface of the item to sanitize, including the bottom. The power of a reflected beam is 40% of the original beam, exceeding the needed germicidal effect by five times. Each lamp has a life of 6,000 hours and has no ozone release.

The typical length of time needed to disinfect and sanitize a set of equipment, including a camera, two lenses, two batteries, and one microphone is just tree minutes. In order for effective sanitization, the objects must be well arranged and spaced in the BOXER chamber to ensure no overlapping.


UVC-BOXER - Demo from CARTONI - Camera Supports on Vimeo.

Dimensions: 100x66x95 cm or 39.5x 26x37.5 in
Weight: 52 kg. or 114.64 lbs
Internal chamber: 93x55x62cm or 36.5x21.5x24 in
Chamber & rack: 10 x 4v UV-C lamps equally distributed on all 6 polished aluminum mirror coating for optimal reflection in all directions.
Power: 110/220 volts, battery or power bank.
Operating tension: 24volts.
Irradiation: 360° UV-C wavelength covering all surfaces, including rack base. The only shadowed zones consisting in the 3 mm diameter of the rack''s stainless steel rods.
Cycle: 3 minutes with timer.

Loading...