GS-CU004
Glensound
₦ 1,672,399.00 VAT excl.
° Inputs
The main input is switchable between mic, mic+12v phantom power, and line.
The input has an adjustable gain control to meet a wide range of dynamic, condenser, and ribbon microphones.
The input passes through a broadcast quality compressor/limiter circuit designed to manage the peaks of excited commentary.
° Outputs/Talkback
There are two output circuits. One is used as the main programme audio, the other as a talkback circuit.
There are separate button controls for each of these using Config+.
They can each be independently configured for latching or momentary, with the programme button also having a 'cough' feature. Both outputs are transformer balanced.
° Monitoring
There are two monitoring inputs each with independent level control.
Each of these inputs can be switched from the left ear, right ear, or both ears.
There is a 4 LED level meter from -6 to +6 dB.
° Power
Battery power is from 1 x 9v PP3, or an external DC power supply.
The GS-CU004 is often used as a remote link to the main commentary unit.
It is favoured by pitch side interviewers, and is popular in combination with wireless systems.
MIC INPUT GAIN: -44dBu to -67dBu
MIC+ PHANTOM PWR GAIN: -36dBu to -59dBu
LINE GAIN: -1dBu to -24dBu
EQUIVALENT INPUT NOISE: 119dBu (22-22KHz RMS gain @ max) Input terminated with 300 Ohms
FREQUENCY REPONSE (Mic-Line): 50Hz to 20KHz <-1dBu
PHANTOM POWER: 12 Volt Phantom power (P12L)
COMPRESSOR/LIMITER: Threshold approx Line up Compressor 3:1 ratio (approx)
THD+NOISE: < 0.25% (50Hz to 20KHz)
PPM METER: 4 x LEDS (-12,-6,0,+6 dBu with reference to prog out)
PGM & TB OUTPUT IMPEDANCE: 50 OHMS Transfomer balanced
FB & CUE INPUT IMPEDANCE: > 80K Ohms Electronically balanced
FB & CUE INPUT GAINS: -20dBu to +10dBu
HEADPHONE ROUTING FB & CUE: inputs switchable to either or both ears
HEADPHONE LEVELS: Max +18dBu with 600 Ohms *****Warning high headphone levels can be harmful to your hearing *****
OPERATOR SIDE TONE: Fixed @ -10dBu with reference to output send level
HEADPHONE CONNECTOR: A or B gauge jack
HEADPHONE IMPEDANCE: 200 to 2000 ohms
POWER:
Internal: 1 x PP3 9 volt battery
External: 12 to 20V @ < 80Ma 2.5 mm Jack (inner positive)
BATTERY LIFE:
BATTERY INDICATOR Steady blue LED indicates good battery
Flashing blue LED indicates low battery
OVERALL SIZE: 43 x 153 x 103 mm
UNIT WEIGHT: 355 Grams (including battery)
Other products in the same category