DJI Zenmuse P1

DJI Zenmuse P1 Drone Tracking Camera, 45MP Full Frame CMOS, TimeSync 2.0 - DJZP02

The DJI Zenmuse P1 is a high-performance, versatile sensing payload designed for DJI's flagship commercial drone, the M300 RTK.
The camera is integrated with a 45MP full-frame CMOS sensor with 24mm, 35mm and 50mm lens options and a 3-axis stabilized gimbal.
When combined with the M300 RTK drone and mapping software package, DJI Terra, the P1 camera provides an efficient and high-precision aerial photogrammetry solution.
The integration of the P1 with the M300 RTK dramatically increases productivity, being up to 10x more efficient than the Phantom 4 RTK for orthomosaic and oblique mapping missions.

45MP full-frame CMOS.
You get 3cm horizontal accuracy and 5cm vertical accuracy without ground control points (3cm GSD, with 75% frontal overlap ratio and 55% lateral overlap ratio).
High efficiency: coverage of an area of 3 km² during a single flight (GSD of 3 cm, with frontal overlap ratio of 75% and lateral overlap ratio of 55%).
3-axis stabilized gimbal with Smart Oblique Capture.
Mechanical global shutter (obtained with mechanical shutter): Shutter speed of 1/2000s.
TimeSync 2.0: Synchronize flight controller, RTK, gimbal and camera in milliseconds.

° Multiple operating modes
The P1 camera has a range of operating modes to enable surveying professionals to capture the best possible data.
These include:
2D Ortho: Collect accurate data quickly and easily, which meets 1:500 and 1:1000 cadastral accuracy standards.
3D Oblique: The multi-angle oblique image data acquired for 3D modeling is provided efficiently and concisely, which can be widely used in many industries such as city planning, land surveying, security command, etc., Helping real 3D and smart cities build.
Detailed reconstruction: High-resolution data images can be obtained efficiently, to help restore the fine texture, structure and characteristics of terrain and objects. It can be widely used in fine building reconstruction, ancient building protection, water conservancy engineering and geological investigation.
Real-Time Reconstruction: Combine with DJI Terra to obtain real-time geographic information of a large area to assist emergency rescue sites.

° Intelligent oblique capture
Smart Oblique Capture allows the P1 to achieve comparable efficiency on oblique mapping missions compared to five-lens oblique payloads.

Swing Pattern: When the P1 performs a five-direction oblique mission, it will swing in five directions at -60 degrees. It will capture images only within the working area, increasing post-processing efficiency by 20%-50%.
High Oblique Operation Efficiency: The P1 will perform the multi-angle swing shooting pattern to greatly improve the operation efficiency on a single lens camera. The working area with the P1 can reach 7.5 square kilometers (3cm GSD, 75% front overlap ratio, 65% lateral overlap ratio) in a single day.
Greater Efficiency: The P1 has greater efficiency on oblique missions than other single-camera payloads.

° Multiple Premier lens options
A 35mm lens is suitable for most mapping missions, but if the drone needs to operate at a higher altitude while maintaining the same resolution, a 50mm lens option is available.
For flights at lower altitudes, the 24mm lens can be used.

The comparative soil sample distance for the different lens options are:
24mm: GSD=H/55.
35mm: GSD = H / 80.
50mm: GSD = H / 120.

° High accuracy with TimeSync 2.0
Thanks to TimeSync 2.0, the P1 is able to achieve very high accuracies of 3cm horizontally and 5cm vertically (GSD of 3cm, with 75% front overlap ratio and 55% side overlap ratio).

TimeSync 2.0 ensures the following:
MEP capture with millisecond exposure.
Millisecond level synchronization with camera, gimbal, flight controller and RTK module.
Real-time compensations: UAV position and orientation offset compensation; gimbal orientation offset compensation; and camera position offset compensation.