The OSDK expansion module can connect a Collector 2 to the Matrice 300 RTK platform and offers standard adapter interfaces that link connection with various integrated computing platforms.
Compatible with M300 RTK and Manifold 2.
Convert interfaces on M300 RTK OSDK into standard interfaces such as USB Type A, UART serial port and XT30 power socket, to connect the connection with integrated computing platforms.
It can be used with the single rising gimbal to meet the needs of multiple scenarios.
When mounted on the M300 RTK, the module can be placed in the safety carrying case while connected to the drone, simplifying storage.
Package Contents
Bracket A (upper) x 2
Bracket B (left) x 1
Bracket C (right) x 1
Bracket D (reinforcement rib) x 3
Bracket connection block x 4
OSDK Adapter Plate Module x 1
USB cable (with two Type A ports) x 1
Power cable XT30 x 1
Cable clamp x 3
Non-slip foot x 3
Wing screw x 5
Screw A (M1.6) x 15
Screw B (M2.0) x 5
Screw C (M3.0) x 5
Video D (M1.6 step) x 3
Screwdriver Kit x 1
Dimensions as assembled: 200 x 120 x 40mm
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.