TF-5

Rode

Cardioid Condenser Microphones with Stereo Mount (Black, Matched Pair)
go to the technical sheet
  • -2.38%
Save 2.38%
€ 1.636,10

€ 1.521,95 VAT excl.

€ 1.675,93
Available in 14 days
Not sure if this is the right product for you? Talk to a consultant
Created in collaboration with the venerable classical producer/engineer Tony Faulkner, the black Rode TF-5 MP is a matched pair of small-diaphragm cardioid condenser microphones optimized for sonic transparency, accurate stereo imaging, and unobtrusive placement. Whether you record orchestral instruments, piano, acoustic guitar, percussion, or drums, the TF-5 MP can reproduce the varying timbre and dynamic range of your source with exactness.
The precision-engineered capsule of each microphone employs a cardioid polar pattern to enhance directionality and reduce ambience. Thanks in part to the JFET active electronics, the microphones are able to handle high SPLs up to 120 dB while delivering a wide, flat frequency response with low noise. Being 48V phantom powered, the mics aren't subject to performance degradation caused by drained batteries.

Attach both TF-5 mics to a single mic stand via the supplied mic clips and SB20 stereo bar, which features angle/measurement indicators for ORTF and X/Y configurations. The compact, lightweight mic housings ensure a balanced setup with a variety of mic stands from compact to heavy duty. Windscreens are included to reduce noise from wind or HVAC systems.

Matched small-diaphragm condenser microphones
Precision engineered in collaboration with producer/engineer Tony Faulkner
Ideal for spot-miking individual instruments, overhead-miking drum/percussion kits, or distant-miking ensembles or orchestras
JFET impedance converter with bipolar output buffer
Low noise of 14 dBA
Compact for easy setup in tight spaces

Microphone
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Condenser
Polar Pattern Cardioid
Circuitry Solid-State
Pad None
High-Pass Filter None
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 120 dB SPL
Impedance 63 Ohms
Sensitivity -29 dBV/Pa at 1 kHz
Dynamic Range 112.6 dB
Signal-to-Noise Ratio 80 dB
Equivalent Noise Level 14 dB A-Weighted
Connectivity
Output Connectors 1 x XLR 3-Pin
Power
Operating Voltage 48 V
Operating Current Consumption 7 mA
Physical
Dimensions diameter: 0.79 x L: 3.89" / diameter: 20 x L: 98.7 mm
Weight 4.02 oz / 114 g
Packaging Info
Package Weight 3.11 lb
Box Dimensions (LxWxH) 12.9 x 6 x 4

Loading...