-
- Photographic Lens
- Cine Lenses
- Lens B4 2/3"
- Lens 1/2"
- Lens 1/3"
- Lens "C" mount
- Lens for Micro Cameras
- Optics
- Remote Controls
- Matte Box
- Follow Focus
- Fluid Zoom
- Photographic Lens Adapter
- Converters Close-Up
- Lens - Wide Converter
- Filters Round
- Filters 6x6
- Filters 5x6
- Filters 5x5
- Filters 4x5.65
- Filters 4x4
- Lens - Spare
- Spare parts
- Lens - Accessories iPhone
-
- Microphones Wireless
- Wired microphones
- Microphone stands - Sheet Music Stands
- Microphones - Accessories
- Intercoms
- Power Amplifers
- Audio Mixer
- Sound Diffusion
- Speakers stands
- Audio Recorders
- Cable & Adaptors Audio
- Audio Equipments
- Test Equipments
- Audio-MIDI interfaces
- Measurement microphones
- Audio Monitoring
- Audio over IP
- Musical instruments
- Control surfaces
- Kit Boom
- Spare parts
- Bags for audio devices
- Radio & walkie talkie
AT-4053B
Audiotechnica
₦ 1,035,599.00 VAT excl.
Condenser microphone for recording the hi-hat of the drums (hi-hat), for percussion in general and for the banjo.
The AT4053b microphone has an interchangeable capsule and is therefore suitable for use in a large variety of applications.
It has a hypercardioid polar pattern that you can easily change by replacing the capsule (supplied) with one of the others available in the catalog (not supplied):
AT4049b-ELE - OMNIDIRECTIONAL capsule
AT4051b-ELE - CARDIOID capsule
It has transformerless balanced outputs for a clean signal even at high levels and to avoid distortion typical of transformer coupled outputs.
• Specifically designed to meet the most demanding acoustic requirements in the fields of professional recording, broadcast and sound reinforcement.
• The balanced output without transformer guarantees a clean signal even in the case of high output levels.
• Transformerless circuitry virtually eliminates low frequency distortion and provides premium response to fast transients.
• The sturdy turned brass housing guarantees long-lasting reliability.
• State-of-the-art design and production techniques ensure compliance with the strict standards of reliability and consistency of product quality
Included accessories:
Rod holder AT8405a
Windproof AT8159
Custody
Capsule: Externally polarized condenser
Polar feature: Hypercardioid
Frequency Response: 20-20,000Hz
High Pass Filter: 80Hz, 12dB / octave
Open circuit sensitivity
- 34 dB (19.9 mV) ref. 1V @ 1 Pa *
Impedance: 50 ohms
Maximum applicable sound pressure
145 dB SPL, 1 kHz @ 1% T.H.D .,
155 dB SPL, with 10 dB attenuator
Intrinsic noise: 16 dB SPL
Dynamic range (typical): 129 dB, 1 kHz @ maximum SPL
Signal to Noise Ratio: 78 dB, 1 kHz @ 1 Pa *
Phantom power requirements
-48V DC, 4.8mA typical
Switches: linear / filtered, attenuator 10 dB (nominal)
Weight (without accessories): 127 g
Dimensions: 155mm length x 21mm diameter (max)
Connector: Integrated XLR3M
Optional interchangeable capsules
-AT4049b-EL (omnidirectional),
-AT4051b-EL (cardioid)
Accessories included:
Rod holder AT8405a
Windproof
Soft case
* 1 Pascal = 10 dynes / cm2 = 10 microbars = 94 dB SPL
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Other products in the same category
ECM-44BMP
Profile USB
AT-4033A
4071-OC-C-B00
ECM-77LM
NTG-1
DH5TO-MTQG
MKH 50 P48 U
AT-4050ST
ATR-2100XUSB
SM11-CN
PA BMG2
HSP ESSENTIAL OMNI-BEIGE
BP28L
S-Mic 3S

