Dotata di tre Modalità Operative
OFF:
In this mode, you can replace the SD card of the Guard 1 video camera and allow connection to another device via the USB port
*Note: Remove the batteries at the end of use so that the camcorder is not damaged
ON:
Once in ON mode, manual controls are not necessary or manual (the control keys have no effect). The camera automatically takes photos or videos (based on the current parameter settings) when activated by PIR sensor activity detection in the area it covers.
SETUP:
In the SETUP mode you can check and change the system settings with the help of the built-in LCD screen. Moving the power switch to the SETUP position will turn on the LCD display and you will see an information screen.
Effective Pixels: Day Sensor:4320 x 3252; Night Sensor: 2592 x 1944
Lens: Night Sensor lens (at night): f=7.36mm F/NO:2.8 FOV=55°,HOV=42°; Day Sensor lens(at day) : f=4.55mm F/NO:4.5 FOV=90°,HOV=82°
IR-Flash Range: High Power LED: 6*850nm(30m) 6*940nm LEDS(25m)
Display Screen: 2.4 " HD Color Display
Image Size: 30M(6400 x 4800); 14M(4320 x 3240); 5M (2592 x 1944);
Video Size: 1920 x 1080; 1280 x 720 ; 640 x 360
PIR Sensitivity: PIR with 4 sensitivity levels:High/ Normal/ Low/Auto
Response Time: Picture trigger: < 0.25 s, Video trigger: <0.6s
Triggering Interval: 1sec-60min programmable
Shooting Numbers: 1-9 programmable
Video Length: 5-60sec. Programmable
Power Supply: 8 x AA''s battery; DC12V
Operating Temperature: -20-60?(Storage temperature:-30-70)
Operating Humidity: 5%-90%
Waterproof: IP67
Other products in the same category