Arm X1

SmartSystem Arm X1 Professional Stabilization Arm

Fly your cine camera with precision and confidence using the Arm X1 Professional Stabilization Arm from SmartSystem.
Its fine-tuning system enables you to perfectly match the mass of your rig with the appropriate level of resistance, resulting in the state of equilibrium known as critical damping.

Its 7075 aluminum alloy, rated higher than aircraft-grade, has the Brinnell hardness, fatigue strength, and tensile strength of carbon steel yet without the weight.
It is outfitted with an industry-standard mating block that can easily be switched from regular to goofy.

The Arm X1 is constructed from 7075 aluminum, which is classified as superior to aircraft-grade aluminum.
It has a Brinnel hardness, fatigue strength, and tensile strength over 60% higher than those of 6082 high-quality aluminum.

A force-multiplier control enables the user to precisely match the resistance with the mass of your rig.
This on-the-go capability comes in handy when doing a lens swap, removing a matte box, or other alterations that affect the mass of the payload.
Finding the balance between too much resistance, which produces oscillations, and too little, which creates a lagging effect, is made simple by the Arm X1's XTune system.

The arm supports a 60 lb/27.22 kg weight range, suitable for a wide array of rigs.

The Arm X1 has a boom range of 28.5"/72 cm, enabling you to raise the camera for a high-angle shot, or lower it down to shoot up at a subject.