FotoPro DMM-903 Macro

The FotoPro DMM-903 is ideal for dual or twin flash macro setups to obtain better lighting distribution.

Advantages:

Flexible in all directions
Lightweight
Packs easily into camera bag
Modular joints - remove or extend joints as and when required
Used and recommended by professional macro photographers

Product Care and Recommendations:

Do not over-tighten the joints!
As each joint can be rotated 180 degrees on a single plane, be careful not to attempt to rotate them in other directions.
Do not attempt to mount large flash units. It may not hold large flashes well when moving about in the field. As a reference, I can mount 2 x Meike MK-R200 flashes on each arm, which weighs about 245g in total.
There are 4 joints per arm. It is recommended to remove 1 joint from each arm and keep the joints as spares. The joints are generally long enough.
For a tighter mount on your camera/lens, use a spring washer with the provided screw.
The hotshoe mount can be removed, revealing a male 1/4" screw thread, compatible with the flash stand of Nikon SB-R200.