XSW-D MINI JACK RX

XSW-D MINI JACK RX

Sennheiser

1/4" Plug-On Receiver for XSW-D Digital Wireless System (2.4 GHz)
go to the technical sheet
€ 180,35

€ 167,77 VAT excl.

Available 2 unit in 4 Days
Not sure if this is the right product for you? Talk to a consultant
nnheiser XSW-D MINI JACK RX Overview
1
2
3
4
5
6
Part of the Sennheiser XSW-D digital wireless system, the XSW-D MINI JACK RX camera-mount receiver is available as an individual component to be used as a backup receiver or as a replacement unit. It features a 3.5mm locking connector ready to connect to a DSLR or camcorder (with additional cable), or a tablet/smartphone (with additional adapter).


The XSW-D puts world-renowned Sennheiser wireless sound quality in a miniaturized, plug-and-record, 1-button digital system that anyone can use. Plug it in, power it up, and you're immediately up and running, instantly lightening your workload so you can concentrate on creating.

Camera-Mount Receiver for XSW-D Digital Wireless Microphone System (2.4 GHz)

Sennheiser XSW-D Specs
System
Frequency Range 2.400 to 2.483 GHz
Latency <4 ms with aptX Live Codec
Transmission Range 250'' / 76.2 m (Line of Sight)
Simultaneous Operation of Units Up to 5 Systems Simultaneously
Frequency Response 10 Hz to 18 kHz
Signal-to-Noise Ratio =106 dB
THD <0.1 %
Modulation GFSK with TDMA
Operating Temperature -10 to 55° C / 14 to 131° F
Relative Humidity 95% (Non-Condensing)
Receiver
Type 1/4" Plug-On Receiver
Output Connector 1/4" / 6.3 mm TS, Male, Foldable (90°)
Audio Output Level Instrument-Level Output Only
Battery Type: Built-In, USB-Rechargeable, Lithium-Ion
Battery Life: 5 Hours
Charging Time: 3 Hours (Typical)
Charging Cycles: Up to 1000 Cycles
Nominal Voltage: 3.7 V
Cell Capacity: 850 mAh
Input Voltage: 5.0 V (Typical)
Charging Temperature: 32 to 140° F / 0 to 60° C
Dimensions 4.8 x 0.9 x 1.1" / 122 x 24 x 28 mm
Weight Not Specified by Manufacturer

Loading...