-
- Photographic Lens
- Cine Lenses
- Lens B4 2/3"
- Lens 1/2"
- Lens 1/3"
- Lens "C" mount
- Lens for Micro Cameras
- Optics
- Remote Controls
- Matte Box
- Follow Focus
- Fluid Zoom
- Photographic Lens Adapter
- Converters Close-Up
- Lens - Wide Converter
- Filters Round
- Filters 6x6
- Filters 5x6
- Filters 5x5
- Filters 4x5.65
- Filters 4x4
- Lens - Spare
- Spare parts
- Lens - Accessories iPhone
-
- Microphones Wireless
- Wired microphones
- Microphone stands - Sheet Music Stands
- Microphones - Accessories
- Intercoms
- Power Amplifers
- Audio Mixer
- Sound Diffusion
- Speakers stands
- Audio Recorders
- Cable & Adaptors Audio
- Audio Equipments
- Test Equipments
- Audio-MIDI interfaces
- Measurement microphones
- Audio Monitoring
- Audio over IP
- Musical instruments
- Control surfaces
- Kit Boom
- Spare parts
- Bags for audio devices
- Radio & walkie talkie
MZA 900 P
Sennheiser
₦ 304,299.00 VAT excl.
From Sennheiser, the MZA 900 P is an in-line power supply and preamplifier designed for use with pre polarized condenser microphones featuring a 1/8" (3.5mm) mini connection. The MZA 900 P effectively converts 48V phantom power and establishes a 3-pin XLR connection for the Sennheiser E 908B, E 908D, HSP 2, HSP 4, ME 2, ME 3, ME 4 and MKE 2 EW Gold microphones.
In-Line Power Supply and XLR Connection
Provides an XLR connection and converts phantom power to Sennheiser pre-polarized condenser microphones with a 3.5mm mini connection.
Wide Compatibility Range
Works with the Sennheiser E 908B, E 908D, HSP 2, HSP 4, ME 2, ME 3, ME 4 and MKE 2 EW Gold microphones.
Belt Clip
The attached belt clip enables easy mounting.
The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 - 52 V phantom powering (P12 - P48). The connected microphone is supplied via the adaptor.
The MZA 900 P is suitable for use with the following Sennheiser microphones:
e 908 B
e 908 D
HSP 2-ew
HSP 4-ew
ME 2
ME 3
ME 4
MKE 2 ew gold
MKE 40-ew
etc.
Frequency Response 20Hz - 20kHz
Gain 0/-12 dB
Output Voltage 1.8V (P48), 0.6V (P12) @ 0dB gain
Output Impedance 100 Ohm
Phantom Power P12 - P48, 10 - 52V, 2.6 - 2,8mA
Operating Temperature -20 - ''60 degrees C
Dimensions 0.86 x 3.93" (22 x 100mm) (Diameter x Length)
Weight 60 g
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Other products in the same category
DCS-1
042901 INVISION HOT SHOE
048406
Deity Boom Pole 2.6m
033053
Kit WLP Lavalier Deluxe Acc.
033204
AT-8466
010324
AT-8115
UA0639
010704
AT-8449ASV
23755
AT-8120
