TST5000

GENERAL
Power Output: from 0 to 5000W continuously adjustable from front panel.
Frequency Range: 87.5÷108.00 MHz, [ 66÷74 MHz (OIRT), 76÷90 MHz (JPN)]
Type of Modulation: Direct frequency modulation of carrier, F3E stereo and mono.
RF Output Impedance: 50 ohm.
RF Output Connector: 7/8” (1+5/8” upon request)RF Output Connector: 7/8" (1+5/8” upon request)
RF Output setting: 10-100W step
VSWR: 1.5:1 Max with automatic fold-back VSWR prot. At all phase angles
Frequency Stability: Internal TCXO ±2 ppm from -5 to +50°C (better on request)
Modulation Capability: over ±200 KHz
Audio Inputs: L&R analog balanced, Unbalanced composite, AES, SCA, RDS
Operator interface setting: Encoder Push-Rotary
LCD Display: Oled hi-definition graphic type
Frequency Control: Synthesizer µprocessor controlled.
Programming step: 10 KHz increments
Interface control: N°2 RS485 ports RJ45 back panel
PC Interface: USB: connector Type B female front panel
Telemetry: RJ45 LAN connection with WEB-Server
Monitor RF: -10 dBm, BNC-F connector
Off Lock RF Muting: < -80 dBc.
RF Harmonics: Exceeds ETSI/CCIR/FCC requirements.
RF Spurious: Exceeds ETSI/CCIR/FCC requirements.
Preemphasis: Flat/50/75µs selectable from front panel.
Asynchronous AM S/N Ratio: -65 dB below ref.100% AM modulation @ 400 Hz.
Synchronous AM S/N Ratio: -60 dB below ref. 100% AM mod. 400 Hz with FM 100%
AC Power Factor: 0.95 typical at 220VAC
Overall efficiency: >72% (typ. 74%)
Operating temperature: -10°C to +50°C.
Max Operating Altitude: > 3000 mt.
Relative Humidity Range: 0 to 95% non condensing.

MONAURAL PERFORMANCE
Operational Modes: Mono (L+R)
Input Impedance: 600 ohm or 10 Kohms balanced.
Input Level: -6 to +12 dBm in 0,5dB step (Other range on request)
Input Connector: XLR female - balanced.
Audio Frequency Response: ±0.15 dB, 30 Hz to 15 KHz.
Preemphasis setting: 0, 50µS, 75µS
Audio Filter Attenuation: < -55 dB @ 19 KHz, < -50 dB 20 KHz to 100 KHz
T H Distortion + Noise: < 0.05% @ 400 Hz
FM S/N Ratio: better than -80 dB RMS ref. ±75 KHz 50µs deemphasis.

MULTIPLEX PERFORMANCE
Composite Input Impedance: 600 ohm or 10 Kohms balanced.
Composite Input Level: -12 to +6 dBm in 0,5dB step (Other range on request)
Input Connector: BNC female.
AES/EBU Input Connector: BNC female
Composite Response: ±0.2 dB, 30 Hz to 100 KHz.
THDistortion + Noise: 0.05% @ 400 Hz
Intermodulation Distortion: 0.05%, 1 KHz/1.3 KHz, 1:1 ratio
FM S/N Ratio: better than -80 dB RMS ref. ±75 KHz 50 µs de-emph. Decoded.

STEREO CODER PERFORMANCE
Audio Input Impedance: 600 ohm balanced, 15 Kohm unbalanced.
Audio Input Level: -6 to +6 dBm in 0,5dB step (Other range on request)
Input Connector: XLR female.
Audio Frequency Response: ±0.15 dB, 30 Hz to 15 KHz.
Preemphasis setting: 0, 50µS, 75µS
THDistortion + Noise: 0.05% @ 400 Hz
Intermodulation Distortion: 0.05%, 1 KHz/1.3 KHz, 1:1 ratio
FM S/N Ratio: -80 dB RMS at ±75 KHz 50 µs de-emphasis.
Pilot Frequency: 19 KHz ± 1 Hz
38 KHz Suppression: -60 dB (typ. -70 dB)
Audio Filter Attenuation: < -55 dB @ 19 KHz, < -50 dB 20 KHz to 100 KHz
Stereo Separation: 30÷100 Hz = -50 dB, 100Hz÷15 KHz = -60 dB
Crosstalk attenuation: Main to Sub -50 dB 30 Hz to 15 KHz below 100% Mod.
SCA-RDS 1&2 PERFORMANCE
Input Level: -6 to +6 dBm in 0,5dB step (Other range on request)
Impedance: 10k ohms unbalanced
Connector: BNC female
Amplitude Response: +/- 0.1dB; 53Hz to 100kHz

MECHANICAL/PHYSICAL
Height: 221 mm (5HE )
Width: 19" (48.3 cm) EIA Rack Mount
Depth: 23" (605 cm) with connectors
Weight: 36 kg 78 lbs unpacked
Height: 221 mm (5HE )
Width: 19" (48.3 cm) EIA Rack Mount
Depth: 23" (605 cm) with connectors
Weight: 36 kg 78 lbs unpacked

1x TST5000 unit trasmitter