IDATA IP-POWER3

Power PoE injector with a 48 V DC port, ideal in the absence of AC power outlets
Output power up to 15.4 Watts
Supports all IEEE 802.3af (Wireless LAN access point and bridge) Compliant PoE peripherals, VoIP (Voice over Internet Protocol) phones, IP cameras
Supports IEEE 802.3af detection and short circuit protection, overload and high voltage protection
Supported distance: up to 100m
Fully compatible design Class 3 POE

Standards

IEEE 802.3af (Power over Ethernet)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)

General Information

Support

- 100Base-TX Cat5 UTP/STP RJ-45, 8 pin

Doors:

- 1 RJ-45 100 Mbps in input
- 1 RJ-45 100 Mbps data output and power
- 1 power connector (3 pin)

Protection Functions:

- Short circuit for GND
- Overload for currents over 450 mA
- High voltage protection for outputs over 52 V

Compatibility: all devices that conform with IEEE 802.3af
Certifications: FCC Class B Part 15, CE

Peding Connector RJ-45 in Input

Pin 1: Rx+ (date received)
Pin 2: Rx- (data received)
Pin 3: Tx+ (data transmit)
Pin 4: NC (not connected)
Pin 5: NC (not connected)
Pin 6: Tx- (data transmit)
Pin 7: NC (not connected)
Pin 8: NC (not connected)

RJ-45 Output connector (Data + Power)

Pin 1: Rx+ (date received)
Pin 2: Rx- (data received)
Pin 3: Tx+ (data transmit)
Pin 4: -Vdc_return (+) (feeding power [+])
Pin 5: -Vdc_return (+) (feeding power [+])
Pin 6: Tx- (data transmit)
Pin 7: -Vdc (feeding power [-])
Pin 8: -Vdc (feeding power [-])

LED

AC (Red) Power Supply
Power on the Data Channel (Green)
Feeding on the Alarm Channel (Red)

Feeding

Input: 100~240V AC, 50 to 60 Hz
Output: 48 V DC / 350 mA
Power consumption: 19 Watts (maximum)

General information

Plastic casing (ABS)
Dimensions: 120 (L) x 50 (W) x 35 (H) mm (4.7 x 2.0 x 1.4 in.)
Weight: 0.14 kg (0