I-SWHUB 6000SI

Save time and money by providing data and power over an existing wired network
Output power up to 60 watts on four-top Cat5 or Cat6 network cable
Compatible with IEEE 802.3bt (Ultra-PoE+), IEEE 802.3at and IEEE 802.3af standard
Supports IEEE 802.3at and IEEE 802.3af compatible devices (Access point and wireless bridge, VoIP [Voice over Internet Protocol], IP surveillance cameras
Supported distance: up to 100m
Internal power supply
Fanless design ideal for quiet operation
Standard

IEEE 802.3af (Power over Ethernet)
IEEE 802.3at (High-Power PoE+ Power over Ethernet)
IEEE 802.3bt (4 Power over Ethernet torque, level 3, 55 w)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3ab (Gigabit Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (flow control for full duplex mode)

General information

Supports:

- 100Base-TX Cat5 UTP/STP RJ45, 8 pin
- 1000Base-T Cat5e UTP/STP RJ45, 8 pin

Doors:

- An input RJ45 10/100/1000 Mbps port
- An output 10/100/1000 Mbps RJ45 port for data and power supply

Protection Functions:

- Short-circuit protection
- Overcurrent protection
- Overvoltage protection

PoE Footing

- Pin 1: DC (-)
- Pin 2: DC (-)
- Pin 3: DC (+)
- Pin 4: DC (+)
- Pin 5: DC (+)
- Pin 6: DC (+)
- Pin 7: DC (-)
- Pin 8: DC (-)

LED

Double color LED for power supply and PoE

Feeding

Input: 100 – 240 V AC, 50 – 60 Hz
Output: 48 V DC, 1.25 A
Power consumption: 60 watts (maximum)

Physical information
Plastic case
Dimensions: 123 (L) x 61 (P) x 40 (A) [mm]
Weight: 0.29 kg
Operating temperature: 0 – 40°C
Operating humidity: 10 – 90% RH, non-condensing
Storage temperature: -20 - 80°C