BP28L
Microphone
Primary Applications: Broadcast, Audio for Video, Location Sound
Form Factor: Shotgun Mic / Stand/Boom Mount
Intended Sound Sources: Vocals, Speech/Voice Over
Sound Field: Mono
Operating Principle: Line Gradient
Capsule: Condenser
Polar Pattern: Lobar, Supercardioid
Orientation: End Address
Circuitry: Solid-State
Pad: -10 dB
High-Pass Filter: 80 Hz, 18 dB/Octave
Gain Adjustment: None
Indicators: None
On-Board Controls: High-Pass Filter, Pad
Windscreen: Foam (Included)
Performance
Frequency Range: 20 Hz to 20 kHz
Maximum SPL
138 dB SPL
148 dB SPL (with Pad)
Impedance: 250 Ohms
Sensitivity: -23 dB
Dynamic Range: 135 dB
Signal-to-Noise Ratio: 91 dB A-Weighted (1 kHz)
Equivalent Noise Level: 3 dB A-Weighted
THD: 1%
Connectivity
Output Connectors: 1 x XLR 3-Pin Male (on Mic)
Headphone Connector: None
Power
Operating Voltage: 11 to 52 V
Operating Current Consumption: 3.4 mA
Physical
Mounting: Mic Clip/Stand Adapter (Included)
Mounting Thread Size: 5/8"-27 Female (3/8"-16 Female with Included Adapter)
Included Case: Hard Case
Included Filters: None
Construction Material: Aluminum
Dimensions: 1.1 x L: 22.4" / diameter: 28 x L: 568 mm
Weight: 11 oz / 313 g
Packaging Info
Package Weight: 3.265 lb
Box Dimensions: 28.4 x 3.9 x 3.5"
Primary Applications: Broadcast, Audio for Video, Location Sound
Form Factor: Shotgun Mic / Stand/Boom Mount
Intended Sound Sources: Vocals, Speech/Voice Over
Sound Field: Mono
Operating Principle: Line Gradient
Capsule: Condenser
Polar Pattern: Lobar, Supercardioid
Orientation: End Address
Circuitry: Solid-State
Pad: -10 dB
High-Pass Filter: 80 Hz, 18 dB/Octave
Gain Adjustment: None
Indicators: None
On-Board Controls: High-Pass Filter, Pad
Windscreen: Foam (Included)
Performance
Frequency Range: 20 Hz to 20 kHz
Maximum SPL
138 dB SPL
148 dB SPL (with Pad)
Impedance: 250 Ohms
Sensitivity: -23 dB
Dynamic Range: 135 dB
Signal-to-Noise Ratio: 91 dB A-Weighted (1 kHz)
Equivalent Noise Level: 3 dB A-Weighted
THD: 1%
Connectivity
Output Connectors: 1 x XLR 3-Pin Male (on Mic)
Headphone Connector: None
Power
Operating Voltage: 11 to 52 V
Operating Current Consumption: 3.4 mA
Physical
Mounting: Mic Clip/Stand Adapter (Included)
Mounting Thread Size: 5/8"-27 Female (3/8"-16 Female with Included Adapter)
Included Case: Hard Case
Included Filters: None
Construction Material: Aluminum
Dimensions: 1.1 x L: 22.4" / diameter: 28 x L: 568 mm
Weight: 11 oz / 313 g
Packaging Info
Package Weight: 3.265 lb
Box Dimensions: 28.4 x 3.9 x 3.5"



