TLM 103 MT STUDIO SET
Technical Data
Acoustical operating: Pressure gradient transducer
Maximum SPL for THD 0.5%2): 144 dB
Directional pattern: Cardioid
Maximum output voltage: 13 dBU
Frequency range: 20 Hz...20 kHz
Dyn. range of the mic. amplifier (A-weighted): 132 dB
Sensitivity at 1 kHz into 1 kohm: 11 mV/Pa
Supply voltage (P48, IEC 1938): 48 V ± 4 V
Rated impedance: 50 ohms
Current consumption (P48, IEC 1938): 3.5 mA
Rated load impedance: 1 kohms
Matching connector: XLR3F
Equivalent noise level, CCIR1): 21 dB
Weight approx.: approx. 260 g
Equivalent noise level, A-weighted1): 12 dB-A
Diameter: 52 mm
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 73 dB
Length: 116 mm
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 82 dB
Supplied with elastic shock absobing EA4 included
General
Misure: D52mm x 116mm
Peso: 0,500kg
Acoustical operating: Pressure gradient transducer
Maximum SPL for THD 0.5%2): 144 dB
Directional pattern: Cardioid
Maximum output voltage: 13 dBU
Frequency range: 20 Hz...20 kHz
Dyn. range of the mic. amplifier (A-weighted): 132 dB
Sensitivity at 1 kHz into 1 kohm: 11 mV/Pa
Supply voltage (P48, IEC 1938): 48 V ± 4 V
Rated impedance: 50 ohms
Current consumption (P48, IEC 1938): 3.5 mA
Rated load impedance: 1 kohms
Matching connector: XLR3F
Equivalent noise level, CCIR1): 21 dB
Weight approx.: approx. 260 g
Equivalent noise level, A-weighted1): 12 dB-A
Diameter: 52 mm
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 73 dB
Length: 116 mm
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 82 dB
Supplied with elastic shock absobing EA4 included
General
Misure: D52mm x 116mm
Peso: 0,500kg
Accessories for TLM 103 MT STUDIO SET
Microphone stands - Sheet Music Stands - Table top stands
Rode - Studio Boom Arm for Broadcast Microphones
₦ 248,753.93
VAT Included
VAT Included
Microphones - Accessories - Blimp
Shure - Popper Stopper Pop Filter, 6"/4-Layer Screen, Gooseneck and Clamp
₦ 107,677.96
VAT Included
VAT Included
Microphones - Accessories - Microphones - Suspensions Elastic
K-Tek - Foam Lined Hand Grip with Boom Pole Head and 3/8" Threading
₦ 530,672.68
VAT Included
VAT Included
K-Tek - Lined Wired Hand Grip with XLR Output Base, Boompole Head and 3/8" Threading
₦ 667,573.93
VAT Included
VAT Included



