CONTROL 16C/T
Frequency Range: 62 Hz to 20 kHz at -10 dB
Frequency Response: 96 Hz to 15 kHz at ±3 dB
Power Capacity: At Lo-Z:
100 W continuous program power
50 W continuous pink noise
* Note: Continuous Pink Noise Rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Program Power is a conservative expression of the system's ability to handle normal speech and music program material, and is defined as 3 dB above the Continuous Pink Noise Rating.
Nominal Sensitivity: 91 dB
Nominal Coverage Angle: 110° conical coverage
Directivity:
- Directivity Factor (Q): 7.8
- Directivity Index (DI): 8.2 dB
Maximum SPL: Rated: 108 dB @ 3.3' / 1.0 m average, 116 dB peak
Nominal Impedance: 8 Ohms (in direct/bypass 8-Ohm setting)
Transformer Taps: 30 W, 15 W, 7.5 W @ 70 or 100 V (plus 3.8 W @ 70 V only)
Crossover: Network: 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver
Transducer:
- LF Driver: 6.5" / 165.1 mm with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high-temperature voice coil
- HF Driver: 0.75" / 19.00 mm, highly damped treated-silk dome, Kapton voice coil, liquid cooling, wide dispersion waveguide
Input Connector:
- Removable locking 4-pin connector with screw-down terminals.
- Maximum wire size 12 AWG (2.5 mm2)
Wiring:
° Connector:
Pin 1 = + In
Pin 2 = - In
Pin 3 = + Loop Thru
Pin 4 = - Loop Thru
Strain Relief: For 2 cables or 2 flex conduits via coupled clamping mechanism
Materials:
- ABS baffle with UL94-V0 and UL94-5VB flame class fire rating
- Zinc-plated steel backcan
Safety Agency Approvals:
UL1480, UL2043, NFPA90, and NFPA70, S7232/UL Listed
Transformer UL registered per UL1876, ROHS, C-tick N108, CE compliant
Baffle meets UL94-V0 and UL94-5VB flammability rating
In accordance with IEC60849/EN60849 systems
Attachment: Safety Seismic: One point, top surface
Ceiling Cutout Size: Circular cutout with 8.8" / 223.5 mm diameter (cardboard cutout template included)
Ceiling T
Frequency Response: 96 Hz to 15 kHz at ±3 dB
Power Capacity: At Lo-Z:
100 W continuous program power
50 W continuous pink noise
* Note: Continuous Pink Noise Rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Program Power is a conservative expression of the system's ability to handle normal speech and music program material, and is defined as 3 dB above the Continuous Pink Noise Rating.
Nominal Sensitivity: 91 dB
Nominal Coverage Angle: 110° conical coverage
Directivity:
- Directivity Factor (Q): 7.8
- Directivity Index (DI): 8.2 dB
Maximum SPL: Rated: 108 dB @ 3.3' / 1.0 m average, 116 dB peak
Nominal Impedance: 8 Ohms (in direct/bypass 8-Ohm setting)
Transformer Taps: 30 W, 15 W, 7.5 W @ 70 or 100 V (plus 3.8 W @ 70 V only)
Crossover: Network: 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver
Transducer:
- LF Driver: 6.5" / 165.1 mm with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high-temperature voice coil
- HF Driver: 0.75" / 19.00 mm, highly damped treated-silk dome, Kapton voice coil, liquid cooling, wide dispersion waveguide
Input Connector:
- Removable locking 4-pin connector with screw-down terminals.
- Maximum wire size 12 AWG (2.5 mm2)
Wiring:
° Connector:
Pin 1 = + In
Pin 2 = - In
Pin 3 = + Loop Thru
Pin 4 = - Loop Thru
Strain Relief: For 2 cables or 2 flex conduits via coupled clamping mechanism
Materials:
- ABS baffle with UL94-V0 and UL94-5VB flame class fire rating
- Zinc-plated steel backcan
Safety Agency Approvals:
UL1480, UL2043, NFPA90, and NFPA70, S7232/UL Listed
Transformer UL registered per UL1876, ROHS, C-tick N108, CE compliant
Baffle meets UL94-V0 and UL94-5VB flammability rating
In accordance with IEC60849/EN60849 systems
Attachment: Safety Seismic: One point, top surface
Ceiling Cutout Size: Circular cutout with 8.8" / 223.5 mm diameter (cardboard cutout template included)
Ceiling T



