Livetrak L-8EAN  4515260021178

Inputs
2 x XLR-1/4" TRS Combo Balanced/Unbalanced Mic/Line/Hi-Z Inputs
4 x XLR-1/4" TRS Combo Balanced Mic/Line Inputs
2 x 1/4" TS Unbalanced Line Inputs
1 x 1/8" / 3.5 mm TRRS Unbalanced Smartphone I/O

Outputs
2 x 3-Pin XLR Male Balanced Line Outputs
4 x 1/4" TRS Female Unbalanced Headphone Outputs

Input Gain Mic/Line Inputs with Hi-Z Off: +10 to +54 dB
Mic/Line Inputs with Hi-Z On: -3 to +41 dB
Input Impedance XLR: 3 Kilohms
1/4" TRS Line: 3 Kilohms
1/4" TS Line: 10 Kilohms
1/4" Hi-Z: 1 Megaohm
3.5 mm TRRS: 10 Kilohms

Maximum Input Level
Mic/Line Inputs (-26 dB Pad Off): -2 dBu at 0 dBFS
Mic/Line Inputs (-26 dB Pad On): +24 dBu at 0 dBFS
1/4" TS Line Inputs: +3 dBu
3.5 mm TRRS: +3 dBu
Phantom Power +48 VDC

Output Impedance
XLR: 100 Ohms
1/4" TRS: 10 Ohms

Maximum Output Level
XLR: +14.5 dBu
1/4" TRS: 10 mW per Channel (60-Ohm Load)
Buses Master: 1
Monitor: 3
Send EFX: 1

Channel Control
Low-Cut Filter: 75 Hz at 12 dB/Octave
High EQ (Shelving): ±15 dB at 10 kHz
Mid EQ (Peaking): ±15 dB at 2.5 kHz
Low EQ (Shelving): ±15 dB at 100 Hz
Level Meters : 12 x 9-Segment LEDs

Effects
8 Types

Recorder
Maximum Simultaneous Recording Tracks: 12
Maximum Simultaneous Playback Tracks: 10
Format: WAV
Bit Depth: 16-Bit or 24-Bit
Sample Rate: 44.1, 48, or 96 kHz
Supported Media Card Types SDHC: 4 to 32 GB (Class 10 or Higher)
SDXC: 64 to 512 GB (Class 10 or Higher)

Audio Interface
Recording: 12 Channels
Playback: 4 Channels
Bit Depth: 24-Bit
Sample Rate: 44.1 or 48 kHz
Interface: USB 2.0

System Requirements
macOS 10.12 or Later
Intel Core i3 or Faster CPU
USB 3.0 / 2.0 (Operation Is Not Guaranteed When Used with USB Hubs or Expansion Cards)

Windows 7 SP1 or Later (32-/64-Bit)
Intel Core i3 or Faster CPU (Operation Is Not Guaranteed with CPUs from Atom, Celeron, or Pentium Series or CPUs Made by AMD)
USB 3.0 / 2.0 (Only USB Host Controllers with Intel Chipsets are Supported,