Dlive-S5000EAN  6938122242265

Inputs
___________________________
Mic/Line XLR Inputs: Balanced XLR, +48V phantom power
Mic/Line Preamp: Fully recallable
Input Sensitivity: -60 to +15dBu
Analogue Gain: +5 to +60dB, 1dB steps
Pad: -20dB Active PAD
Maximum Input Level: +30dBu (PAD in)
Input Impedance: >4kOmega (Pad out), >10kOmega (Pad in)
Mic EIN: -127dB with 150Omega source
Phantom Power indication: Per socket, internal or external phantom power sensing, triggered at 24V
Digatl Inputs:
- AES3 2 Ch XLR, 2.5Vpp balanced terminated 110Omega
- SRC on each pair, range 32K-192lHz, with bypass option

Outputs
___________________________
Analogue XLR Outputs: Balanced, Relay protected
Output Impedance: <75Omega
Nominal Output: +4dBu = 0dB meter reading
Maximum Output Level: +22dBu
Residual Output Noise: -92dBu (muted, 20-20kHz) | -90dBu (muted, 20-40kHz)
Digital Outputs:
- AES3 2 Ch XLR, 2.5Vpp balanced terminated 110Omega
- 96kHz sampling rate, switchable to 48kHz, 44.1kHz

System
___________________________
Measured balanced XLR in to XLR out, 20-20kHz, minumum Gain, Pad out
Dynamic Range: 110dB
System Signal to Noise: -92dB
Frequency Response: 20Hz - 30kHz +0/-0.8dB
THD+N (analogue in to out): 0.0015% @ +16dBu output, 1kHz 0dB gain
Headroom: +18dB
Internal operating Level: 0dBu
dBFS Alignment: +18dBu = 0dBFS (+22dBu at XLR output)
Meter Calibration: 0dB meter = -18dBFS (+4dBu at XLR out)
Meter Peak indication: -3dBFS (+19dBu at XLR out)
Sampling Rate: 96kHz +/- 20 PPM
ADC: 24-bit Delta-Sigma
DAC: 24-bit Delta-Sigma
Latency: 0.7 ms (MixRack XLR in to XLR out, Input to Mix) | +5 samples, Surface to Mixrack (GigaACE hop) | +8 samples, DX32 to Mixrack (DXhop)
Operating Temperature Range:
MPS16 V1 300w: 0°C to 35°C (32°F to 95°F)
MPS16 V2 250w: 0°C to 40°C (32°F to 104°F)
Mains Voltage Operating Range: 100-240V AC, 50/60Hz
Mains Power: 300W max (MPS16 V1 300W)
Consumption: 250W max (MPS16 V2 250W)

Dimensions and Weight
___________________________
Width x Depth x Height x We