Dlive-DM48EAN  6938122242227

Input
____________________________
Mic/Line XLR Inputs: Balanced XLR, +48V phantom power
Mic/Line Preamp: Fully recallable
Input Sensitivity: -60 to +15dBu
Analogue Gain: +5 to +60dB, 1 dB steps
Pad: -20dB Active PAD
Maximum Input Level: +30dBu (PAD in)
Input Impedance: >4KOmega (Pad Out), >1kOmega (Pad in)
Mic EIN: -127dB with 150Omega source
Phantom Power indication: Per socket, internal or external phantom power sensing, triggered at 24V

Outputs
____________________________
Analogue XLR Outputs: Balanced, Relay protected
Output Impedance: <75Omega
Nominal Output: +4dBu = 0dB meter reading
Maximum Output Level: +22dBu
Residual Output Noise: -92dBu (muted, 20-20kHz) | -90dBu (muted, 20-40kHz)

System
____________________________
Measured balanced XLR in to XLR out, 20-20kHz, minumum Gain, Pad out, signal @ 0dB (meter)
Dynamic Range: 110dB
System Signal to Noise: -92dB
Frequency Response: 20Hz - 30kHz +0/-0.8dB
THD+N (analogue in to out): 0.0015% @ +16dBu output, 1kHz 0dB gain
Headroom: +18dB
Internal operating Level: 0dBu
dBFS Alignment: +18dBu = 0dBFS (+22dBU at XLR output)
Meter Calibration: 0dB meter = -18dBFS (+4dBu at XLR out)
Meter Peak indication: - 3dBFS (+19dBu at XLR out)
Sampling Rate: 96kHz +/-20 PPM
ADC: 24 bit Delta Sigma
DAC: 24 bit Delta Sigma
Latency: 0.7 ms (MixRack XLR in to XLR out, Input to Mix) | + 5 samples, Surface to Mixrack (GigaACE hop) | + 8 samples, DX32 to Mixrack (DX hop)

Power
____________________________
Mains Voltage Operating Range: 100 240V AC, 50/60Hz
Mains Power Consumption: 300W max (MPS16 V1 300W) | 250W max (MPS16 V2 250W)

Temperature
____________________________
Fitted with MPS16 V1 300w: 0°C to 35°C (32°F to 95°F)
Fitted with MPS16 V2 250w: 0°C to 40°C (32°F to 104°F)

Dimensions and weight
____________________________
Width x Depth x Height x Weight: 482.6 x 313 x 369 mm (19"x 12.3"x 14.5") x 17.5kg (39lbs)
With boxed: 590 x 420 x 510 mm (23.2"x 16.5"x 20.1") x 20kg (44.1lbs)