NA-2I2O-DLINEEAN  7613187019081

Electrical
Power consumption: < 2 watts
Power supply: Compliant PoE switch or PoE injector (IEEE 802.3af/at/bt, handshake required)

Environmental
Standard compliance:
REACH EC 1907/2006
Directive 2011/65/EU
IEC 62368-1:2018
IEC 62368-1:2023
EN IEC 62368-1:2020+A11:2020
UL 62368-1:2019
UL 62368-1:2021
CSA C22.2 No. 62368-1:19
Ingress protection class: IP20
Operating temperature: -5 °C to + 60 °C
Storage temperature: -30 °C to +80 °C

Dante
Channels: 2 INPUTS (line level), 2 OUTPUTS (line level)
Supported sampling rates: 44.1 / 48 / 88.2 / 96 kHz
Bit depth: 16, 24 and 32 Bit
Latency: Depending on the network configuration, 1 ms (standard)
Ethernet connection: 100 BASE-TX (PoE support)

Analog audio input
Input impedance: 6.6 kOhm
Input level (balanced): 24 dBu max.
Frequency response: 20 Hz to 20 kHz (+/-0.5 dB)
Dynamic range: > 100 dB
Signal-to-noise ratio: > 108 dB
THD + noise: 0.01 % @ + 4 dBu, A-weighting
Crosstalk: -110 dB @ 20 kHz

Analog audio output
Output impedance: < 150 Ohm
Output level (balanced): 24 dBu max.
Frequency response: 20 Hz to 20 kHz (+/-0.5 dB)
Dynamic range: > 100 dB
Signal-to-noise ratio: > 108 dB
THD + noise: < 0.01 % @ + 4 dBu, A-weighting
Crosstalk: -100 dB @ 20 kHz

Dimensions & Weight
Dimensions (with rubber protection):
l = 164 mm (6.3 inches)
w = 82 mm (3.2 inches)
h = 51 mm (2.0 inches)

l = 151 mm (5.9 inches)
w = 66 mm (2.6 inches)
h = 41 mm (1.6 inches)
Weight: 0.44 kg (1 pound)