Professional cleaning for all types of Full Frame, CMOS or CCD sensors, with a width equal to or greater than 24mm, photographic / video lenses, filters etc. It can also be used to clean camera or smartphone displays, optical lenses, monitors etc.
VSGO pads adopt a superfine microfiber cover with extraordinary cleaning capacity, which precisely removes dust and particles.
The pads are made with the utmost precision to adapt to the sensor size. By choosing the correct size you can clean the sensor accurately and easily.
VSGO is the first company in the sector to make its products in a clean room, then sealing them in disposable vacuum containers to obtain a production of cleaning tools with contamination close to 0.
Cleaning procedure:
Choose a clean place, set the camera to cleaning mode and remove the lens
Use a professional VSGO blower to remove fine dust
Remove a new swab from the package; place it on the sensor at an angle of about 60 ° and wipe it gently over the surface. Repeat in the other direction by turning the swab to the clean side
Repeat step 3 with a clean swab
If stubborn stains remain, pour 1-2 drops of Sensor Clean Liquid onto a freshly opened swab and wipe it gently over the sensor or mirror. Wipe with a new dry swab to absorb any remaining liquid
Exit Cleaning Mode when done. Turn off the camera and install the lens. Keep the camera in a clean and safe place.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.