ZonePro 641M

The dbx ZonePRO 640m is a digital zone processor with a fixed I/O, preconfigured architecture, configurable insert processing, and optional duplication of audio to an additional ZonePRO device via a link bus.

The unit features six inputs with four balanced mic/line switchable terminal block inputs and two unbalanced, mono-summed RCA input pairs. There is hardware-controlled microphone gain per channel. The pre-configured architecture has input processing with a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.

The front panel features comprehensive signal metering, a well-spec'd LCD display and user-specified front panel control. Additional system control is offered in the form of optional zone wall-controllers, which provide simple interfaces for functions such as volume, source, and preset control. All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m. The dbx ZonePRO 640m ships with a power cord, a set of rack screws, and an RS-232 modem cable.

Six inputs and 4 outputs
Four balanced mic/line inputs
Two unbalanced, mono-summed RCA input pairs
Microphone gain per channel
Preconfigured architecture
Two configurable input insert positions
One configurable output insert position
AutoWarmth per output zone
Link bus
comprehensive signal metering
Front panel LCD
User-specified front panel control
Optional ZC controllers
Ethernet control
Serial control
Third party control
Wizard-driven configuration